/* $NetBSD: pmap.c,v 1.114.20.1 2020/08/26 18:06:54 martin Exp $ */ /*- * Copyright (c) 1996, 1997 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jeremy Cooper. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * XXX These comments aren't quite accurate. Need to change. * The sun3x uses the MC68851 Memory Management Unit, which is built * into the CPU. The 68851 maps virtual to physical addresses using * a multi-level table lookup, which is stored in the very memory that * it maps. The number of levels of lookup is configurable from one * to four. In this implementation, we use three, named 'A' through 'C'. * * The MMU translates virtual addresses into physical addresses by * traversing these tables in a process called a 'table walk'. The most * significant 7 bits of the Virtual Address ('VA') being translated are * used as an index into the level A table, whose base in physical memory * is stored in a special MMU register, the 'CPU Root Pointer' or CRP. The * address found at that index in the A table is used as the base * address for the next table, the B table. The next six bits of the VA are * used as an index into the B table, which in turn gives the base address * of the third and final C table. * * The next six bits of the VA are used as an index into the C table to * locate a Page Table Entry (PTE). The PTE is a physical address in memory * to which the remaining 13 bits of the VA are added, producing the * mapped physical address. * * To map the entire memory space in this manner would require 2114296 bytes * of page tables per process - quite expensive. Instead we will * allocate a fixed but considerably smaller space for the page tables at * the time the VM system is initialized. When the pmap code is asked by * the kernel to map a VA to a PA, it allocates tables as needed from this * pool. When there are no more tables in the pool, tables are stolen * from the oldest mapped entries in the tree. This is only possible * because all memory mappings are stored in the kernel memory map * structures, independent of the pmap structures. A VA which references * one of these invalidated maps will cause a page fault. The kernel * will determine that the page fault was caused by a task using a valid * VA, but for some reason (which does not concern it), that address was * not mapped. It will ask the pmap code to re-map the entry and then * it will resume executing the faulting task. * * In this manner the most efficient use of the page table space is * achieved. Tasks which do not execute often will have their tables * stolen and reused by tasks which execute more frequently. The best * size for the page table pool will probably be determined by * experimentation. * * You read all of the comments so far. Good for you. * Now go play! */ /*** A Note About the 68851 Address Translation Cache * The MC68851 has a 64 entry cache, called the Address Translation Cache * or 'ATC'. This cache stores the most recently used page descriptors * accessed by the MMU when it does translations. Using a marker called a * 'task alias' the MMU can store the descriptors from 8 different table * spaces concurrently. The task alias is associated with the base * address of the level A table of that address space. When an address * space is currently active (the CRP currently points to its A table) * the only cached descriptors that will be obeyed are ones which have a * matching task alias of the current space associated with them. * * Since the cache is always consulted before any table lookups are done, * it is important that it accurately reflect the state of the MMU tables. * Whenever a change has been made to a table that has been loaded into * the MMU, the code must be sure to flush any cached entries that are * affected by the change. These instances are documented in the code at * various points. */ /*** A Note About the Note About the 68851 Address Translation Cache * 4 months into this code I discovered that the sun3x does not have * a MC68851 chip. Instead, it has a version of this MMU that is part of the * the 68030 CPU. * All though it behaves very similarly to the 68851, it only has 1 task * alias and a 22 entry cache. So sadly (or happily), the first paragraph * of the previous note does not apply to the sun3x pmap. */ #include __KERNEL_RCSID(0, "$NetBSD: pmap.c,v 1.114.20.1 2020/08/26 18:06:54 martin Exp $"); #include "opt_ddb.h" #include "opt_pmap_debug.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pmap_pvt.h" /* XXX - What headers declare these? */ extern struct pcb *curpcb; /* Defined in locore.s */ extern char kernel_text[]; /* Defined by the linker */ extern char etext[], edata[], end[]; extern char *esym; /* DDB */ /*************************** DEBUGGING DEFINITIONS *********************** * Macros, preprocessor defines and variables used in debugging can make * * code hard to read. Anything used exclusively for debugging purposes * * is defined here to avoid having such mess scattered around the file. * *************************************************************************/ #ifdef PMAP_DEBUG /* * To aid the debugging process, macros should be expanded into smaller steps * that accomplish the same goal, yet provide convenient places for placing * breakpoints. When this code is compiled with PMAP_DEBUG mode defined, the * 'INLINE' keyword is defined to an empty string. This way, any function * defined to be a 'static INLINE' will become 'outlined' and compiled as * a separate function, which is much easier to debug. */ #define INLINE /* nothing */ /* * It is sometimes convenient to watch the activity of a particular table * in the system. The following variables are used for that purpose. */ a_tmgr_t *pmap_watch_atbl = 0; b_tmgr_t *pmap_watch_btbl = 0; c_tmgr_t *pmap_watch_ctbl = 0; int pmap_debug = 0; #define DPRINT(args) if (pmap_debug) printf args #else /********** Stuff below is defined if NOT debugging **************/ #define INLINE inline #define DPRINT(args) /* nada */ #endif /* PMAP_DEBUG */ /*********************** END OF DEBUGGING DEFINITIONS ********************/ /*** Management Structure - Memory Layout * For every MMU table in the sun3x pmap system there must be a way to * manage it; we must know which process is using it, what other tables * depend on it, and whether or not it contains any locked pages. This * is solved by the creation of 'table management' or 'tmgr' * structures. One for each MMU table in the system. * * MAP OF MEMORY USED BY THE PMAP SYSTEM * * towards lower memory * kernAbase -> +-------------------------------------------------------+ * | Kernel MMU A level table | * kernBbase -> +-------------------------------------------------------+ * | Kernel MMU B level tables | * kernCbase -> +-------------------------------------------------------+ * | | * | Kernel MMU C level tables | * | | * mmuCbase -> +-------------------------------------------------------+ * | User MMU C level tables | * mmuAbase -> +-------------------------------------------------------+ * | | * | User MMU A level tables | * | | * mmuBbase -> +-------------------------------------------------------+ * | User MMU B level tables | * tmgrAbase -> +-------------------------------------------------------+ * | TMGR A level table structures | * tmgrBbase -> +-------------------------------------------------------+ * | TMGR B level table structures | * tmgrCbase -> +-------------------------------------------------------+ * | TMGR C level table structures | * pvbase -> +-------------------------------------------------------+ * | Physical to Virtual mapping table (list heads) | * pvebase -> +-------------------------------------------------------+ * | Physical to Virtual mapping table (list elements) | * | | * +-------------------------------------------------------+ * towards higher memory * * For every A table in the MMU A area, there will be a corresponding * a_tmgr structure in the TMGR A area. The same will be true for * the B and C tables. This arrangement will make it easy to find the * controling tmgr structure for any table in the system by use of * (relatively) simple macros. */ /* * Global variables for storing the base addresses for the areas * labeled above. */ static vaddr_t kernAphys; static mmu_long_dte_t *kernAbase; static mmu_short_dte_t *kernBbase; static mmu_short_pte_t *kernCbase; static mmu_short_pte_t *mmuCbase; static mmu_short_dte_t *mmuBbase; static mmu_long_dte_t *mmuAbase; static a_tmgr_t *Atmgrbase; static b_tmgr_t *Btmgrbase; static c_tmgr_t *Ctmgrbase; static pv_t *pvbase; static pv_elem_t *pvebase; static struct pmap kernel_pmap; struct pmap *const kernel_pmap_ptr = &kernel_pmap; /* * This holds the CRP currently loaded into the MMU. */ struct mmu_rootptr kernel_crp; /* * Just all around global variables. */ static TAILQ_HEAD(a_pool_head_struct, a_tmgr_struct) a_pool; static TAILQ_HEAD(b_pool_head_struct, b_tmgr_struct) b_pool; static TAILQ_HEAD(c_pool_head_struct, c_tmgr_struct) c_pool; /* * Flags used to mark the safety/availability of certain operations or * resources. */ /* Safe to use pmap_bootstrap_alloc(). */ static bool bootstrap_alloc_enabled = false; /* Temporary virtual pages are in use */ int tmp_vpages_inuse; /* * XXX: For now, retain the traditional variables that were * used in the old pmap/vm interface (without NONCONTIG). */ /* Kernel virtual address space available: */ vaddr_t virtual_avail, virtual_end; /* Physical address space available: */ paddr_t avail_start, avail_end; /* This keep track of the end of the contiguously mapped range. */ vaddr_t virtual_contig_end; /* Physical address used by pmap_next_page() */ paddr_t avail_next; /* These are used by pmap_copy_page(), etc. */ vaddr_t tmp_vpages[2]; /* memory pool for pmap structures */ struct pool pmap_pmap_pool; /* * The 3/80 is the only member of the sun3x family that has non-contiguous * physical memory. Memory is divided into 4 banks which are physically * locatable on the system board. Although the size of these banks varies * with the size of memory they contain, their base addresses are * permenently fixed. The following structure, which describes these * banks, is initialized by pmap_bootstrap() after it reads from a similar * structure provided by the ROM Monitor. * * For the other machines in the sun3x architecture which do have contiguous * RAM, this list will have only one entry, which will describe the entire * range of available memory. */ struct pmap_physmem_struct avail_mem[SUN3X_NPHYS_RAM_SEGS]; u_int total_phys_mem; /*************************************************************************/ /* * XXX - Should "tune" these based on statistics. * * My first guess about the relative numbers of these needed is * based on the fact that a "typical" process will have several * pages mapped at low virtual addresses (text, data, bss), then * some mapped shared libraries, and then some stack pages mapped * near the high end of the VA space. Each process can use only * one A table, and most will use only two B tables (maybe three) * and probably about four C tables. Therefore, the first guess * at the relative numbers of these needed is 1:2:4 -gwr * * The number of C tables needed is closely related to the amount * of physical memory available plus a certain amount attributable * to the use of double mappings. With a few simulation statistics * we can find a reasonably good estimation of this unknown value. * Armed with that and the above ratios, we have a good idea of what * is needed at each level. -j * * Note: It is not physical memory memory size, but the total mapped * virtual space required by the combined working sets of all the * currently _runnable_ processes. (Sleeping ones don't count.) * The amount of physical memory should be irrelevant. -gwr */ #ifdef FIXED_NTABLES #define NUM_A_TABLES 16 #define NUM_B_TABLES 32 #define NUM_C_TABLES 64 #else unsigned int NUM_A_TABLES, NUM_B_TABLES, NUM_C_TABLES; #endif /* FIXED_NTABLES */ /* * This determines our total virtual mapping capacity. * Yes, it is a FIXED value so we can pre-allocate. */ #define NUM_USER_PTES (NUM_C_TABLES * MMU_C_TBL_SIZE) /* * The size of the Kernel Virtual Address Space (KVAS) * for purposes of MMU table allocation is -KERNBASE * (length from KERNBASE to 0xFFFFffff) */ #define KVAS_SIZE (-KERNBASE3X) /* Numbers of kernel MMU tables to support KVAS_SIZE. */ #define KERN_B_TABLES (KVAS_SIZE >> MMU_TIA_SHIFT) #define KERN_C_TABLES (KVAS_SIZE >> MMU_TIB_SHIFT) #define NUM_KERN_PTES (KVAS_SIZE >> MMU_TIC_SHIFT) /*************************** MISCELANEOUS MACROS *************************/ void *pmap_bootstrap_alloc(int); static INLINE void *mmu_ptov(paddr_t); static INLINE paddr_t mmu_vtop(void *); #if 0 static INLINE a_tmgr_t *mmuA2tmgr(mmu_long_dte_t *); #endif /* 0 */ static INLINE b_tmgr_t *mmuB2tmgr(mmu_short_dte_t *); static INLINE c_tmgr_t *mmuC2tmgr(mmu_short_pte_t *); static INLINE pv_t *pa2pv(paddr_t); static INLINE int pteidx(mmu_short_pte_t *); static INLINE pmap_t current_pmap(void); /* * We can always convert between virtual and physical addresses * for anything in the range [KERNBASE ... avail_start] because * that range is GUARANTEED to be mapped linearly. * We rely heavily upon this feature! */ static INLINE void * mmu_ptov(paddr_t pa) { vaddr_t va; va = (pa + KERNBASE3X); #ifdef PMAP_DEBUG if ((va < KERNBASE3X) || (va >= virtual_contig_end)) panic("mmu_ptov"); #endif return (void *)va; } static INLINE paddr_t mmu_vtop(void *vva) { vaddr_t va; va = (vaddr_t)vva; #ifdef PMAP_DEBUG if ((va < KERNBASE3X) || (va >= virtual_contig_end)) panic("mmu_vtop"); #endif return va - KERNBASE3X; } /* * These macros map MMU tables to their corresponding manager structures. * They are needed quite often because many of the pointers in the pmap * system reference MMU tables and not the structures that control them. * There needs to be a way to find one when given the other and these * macros do so by taking advantage of the memory layout described above. * Here's a quick step through the first macro, mmuA2tmgr(): * * 1) find the offset of the given MMU A table from the base of its table * pool (table - mmuAbase). * 2) convert this offset into a table index by dividing it by the * size of one MMU 'A' table. (sizeof(mmu_long_dte_t) * MMU_A_TBL_SIZE) * 3) use this index to select the corresponding 'A' table manager * structure from the 'A' table manager pool (Atmgrbase[index]). */ /* This function is not currently used. */ #if 0 static INLINE a_tmgr_t * mmuA2tmgr(mmu_long_dte_t *mmuAtbl) { int idx; /* Which table is this in? */ idx = (mmuAtbl - mmuAbase) / MMU_A_TBL_SIZE; #ifdef PMAP_DEBUG if ((idx < 0) || (idx >= NUM_A_TABLES)) panic("mmuA2tmgr"); #endif return &Atmgrbase[idx]; } #endif /* 0 */ static INLINE b_tmgr_t * mmuB2tmgr(mmu_short_dte_t *mmuBtbl) { int idx; /* Which table is this in? */ idx = (mmuBtbl - mmuBbase) / MMU_B_TBL_SIZE; #ifdef PMAP_DEBUG if ((idx < 0) || (idx >= NUM_B_TABLES)) panic("mmuB2tmgr"); #endif return &Btmgrbase[idx]; } /* mmuC2tmgr INTERNAL ** * Given a pte known to belong to a C table, return the address of * that table's management structure. */ static INLINE c_tmgr_t * mmuC2tmgr(mmu_short_pte_t *mmuCtbl) { int idx; /* Which table is this in? */ idx = (mmuCtbl - mmuCbase) / MMU_C_TBL_SIZE; #ifdef PMAP_DEBUG if ((idx < 0) || (idx >= NUM_C_TABLES)) panic("mmuC2tmgr"); #endif return &Ctmgrbase[idx]; } /* This is now a function call below. * #define pa2pv(pa) \ * (&pvbase[(unsigned long)\ * m68k_btop(pa)\ * ]) */ /* pa2pv INTERNAL ** * Return the pv_list_head element which manages the given physical * address. */ static INLINE pv_t * pa2pv(paddr_t pa) { struct pmap_physmem_struct *bank; int idx; bank = &avail_mem[0]; while (pa >= bank->pmem_end) bank = bank->pmem_next; pa -= bank->pmem_start; idx = bank->pmem_pvbase + m68k_btop(pa); #ifdef PMAP_DEBUG if ((idx < 0) || (idx >= physmem)) panic("pa2pv"); #endif return &pvbase[idx]; } /* pteidx INTERNAL ** * Return the index of the given PTE within the entire fixed table of * PTEs. */ static INLINE int pteidx(mmu_short_pte_t *pte) { return pte - kernCbase; } /* * This just offers a place to put some debugging checks, * and reduces the number of places "curlwp" appears... */ static INLINE pmap_t current_pmap(void) { struct vmspace *vm; struct vm_map *map; pmap_t pmap; vm = curproc->p_vmspace; map = &vm->vm_map; pmap = vm_map_pmap(map); return pmap; } /*************************** FUNCTION DEFINITIONS ************************ * These appear here merely for the compiler to enforce type checking on * * all function calls. * *************************************************************************/ /* * Internal functions */ a_tmgr_t *get_a_table(void); b_tmgr_t *get_b_table(void); c_tmgr_t *get_c_table(void); int free_a_table(a_tmgr_t *, bool); int free_b_table(b_tmgr_t *, bool); int free_c_table(c_tmgr_t *, bool); void pmap_bootstrap_aalign(int); void pmap_alloc_usermmu(void); void pmap_alloc_usertmgr(void); void pmap_alloc_pv(void); void pmap_init_a_tables(void); void pmap_init_b_tables(void); void pmap_init_c_tables(void); void pmap_init_pv(void); void pmap_clear_pv(paddr_t, int); static INLINE bool is_managed(paddr_t); bool pmap_remove_a(a_tmgr_t *, vaddr_t, vaddr_t); bool pmap_remove_b(b_tmgr_t *, vaddr_t, vaddr_t); bool pmap_remove_c(c_tmgr_t *, vaddr_t, vaddr_t); void pmap_remove_pte(mmu_short_pte_t *); void pmap_enter_kernel(vaddr_t, paddr_t, vm_prot_t); static INLINE void pmap_remove_kernel(vaddr_t, vaddr_t); static INLINE void pmap_protect_kernel(vaddr_t, vaddr_t, vm_prot_t); static INLINE bool pmap_extract_kernel(vaddr_t, paddr_t *); vaddr_t pmap_get_pteinfo(u_int, pmap_t *, c_tmgr_t **); static INLINE int pmap_dereference(pmap_t); bool pmap_stroll(pmap_t, vaddr_t, a_tmgr_t **, b_tmgr_t **, c_tmgr_t **, mmu_short_pte_t **, int *, int *, int *); void pmap_bootstrap_copyprom(void); void pmap_takeover_mmu(void); void pmap_bootstrap_setprom(void); static void pmap_page_upload(void); #ifdef PMAP_DEBUG /* Debugging function definitions */ void pv_list(paddr_t, int); #endif /* PMAP_DEBUG */ /** Interface functions ** - functions required by the Mach VM Pmap interface, with MACHINE_CONTIG ** defined. ** The new UVM doesn't require them so now INTERNAL. **/ static INLINE void pmap_pinit(pmap_t); static INLINE void pmap_release(pmap_t); /********************************** CODE ******************************** * Functions that are called from other parts of the kernel are labeled * * as 'INTERFACE' functions. Functions that are only called from * * within the pmap module are labeled as 'INTERNAL' functions. * * Functions that are internal, but are not (currently) used at all are * * labeled 'INTERNAL_X'. * ************************************************************************/ /* pmap_bootstrap INTERNAL ** * Initializes the pmap system. Called at boot time from * locore2.c:_vm_init() * * Reminder: having a pmap_bootstrap_alloc() and also having the VM * system implement pmap_steal_memory() is redundant. * Don't release this code without removing one or the other! */ void pmap_bootstrap(vaddr_t nextva) { struct physmemory *membank; struct pmap_physmem_struct *pmap_membank; vaddr_t va, eva; paddr_t pa; int b, c, i, j; /* running table counts */ int size, resvmem; /* * This function is called by __bootstrap after it has * determined the type of machine and made the appropriate * patches to the ROM vectors (XXX- I don't quite know what I meant * by that.) It allocates and sets up enough of the pmap system * to manage the kernel's address space. */ /* * Determine the range of kernel virtual and physical * space available. Note that we ABSOLUTELY DEPEND on * the fact that the first bank of memory (4MB) is * mapped linearly to KERNBASE (which we guaranteed in * the first instructions of locore.s). * That is plenty for our bootstrap work. */ virtual_avail = m68k_round_page(nextva); virtual_contig_end = KERNBASE3X + 0x400000; /* +4MB */ virtual_end = VM_MAX_KERNEL_ADDRESS; /* Don't need avail_start til later. */ /* We may now call pmap_bootstrap_alloc(). */ bootstrap_alloc_enabled = true; /* * This is a somewhat unwrapped loop to deal with * copying the PROM's 'phsymem' banks into the pmap's * banks. The following is always assumed: * 1. There is always at least one bank of memory. * 2. There is always a last bank of memory, and its * pmem_next member must be set to NULL. */ membank = romVectorPtr->v_physmemory; pmap_membank = avail_mem; total_phys_mem = 0; for (;;) { /* break on !membank */ pmap_membank->pmem_start = membank->address; pmap_membank->pmem_end = membank->address + membank->size; total_phys_mem += membank->size; membank = membank->next; if (!membank) break; /* This silly syntax arises because pmap_membank * is really a pre-allocated array, but it is put into * use as a linked list. */ pmap_membank->pmem_next = pmap_membank + 1; pmap_membank = pmap_membank->pmem_next; } /* This is the last element. */ pmap_membank->pmem_next = NULL; /* * Note: total_phys_mem, physmem represent * actual physical memory, including that * reserved for the PROM monitor. */ physmem = btoc(total_phys_mem); /* * Avail_end is set to the first byte of physical memory * after the end of the last bank. We use this only to * determine if a physical address is "managed" memory. * This address range should be reduced to prevent the * physical pages needed by the PROM monitor from being used * in the VM system. */ resvmem = total_phys_mem - *(romVectorPtr->memoryAvail); resvmem = m68k_round_page(resvmem); avail_end = pmap_membank->pmem_end - resvmem; /* * First allocate enough kernel MMU tables to map all * of kernel virtual space from KERNBASE to 0xFFFFFFFF. * Note: All must be aligned on 256 byte boundaries. * Start with the level-A table (one of those). */ size = sizeof(mmu_long_dte_t) * MMU_A_TBL_SIZE; kernAbase = pmap_bootstrap_alloc(size); memset(kernAbase, 0, size); /* Now the level-B kernel tables... */ size = sizeof(mmu_short_dte_t) * MMU_B_TBL_SIZE * KERN_B_TABLES; kernBbase = pmap_bootstrap_alloc(size); memset(kernBbase, 0, size); /* Now the level-C kernel tables... */ size = sizeof(mmu_short_pte_t) * MMU_C_TBL_SIZE * KERN_C_TABLES; kernCbase = pmap_bootstrap_alloc(size); memset(kernCbase, 0, size); /* * Note: In order for the PV system to work correctly, the kernel * and user-level C tables must be allocated contiguously. * Nothing should be allocated between here and the allocation of * mmuCbase below. XXX: Should do this as one allocation, and * then compute a pointer for mmuCbase instead of this... * * Allocate user MMU tables. * These must be contiguous with the preceding. */ #ifndef FIXED_NTABLES /* * The number of user-level C tables that should be allocated is * related to the size of physical memory. In general, there should * be enough tables to map four times the amount of available RAM. * The extra amount is needed because some table space is wasted by * fragmentation. */ NUM_C_TABLES = (total_phys_mem * 4) / (MMU_C_TBL_SIZE * MMU_PAGE_SIZE); NUM_B_TABLES = NUM_C_TABLES / 2; NUM_A_TABLES = NUM_B_TABLES / 2; #endif /* !FIXED_NTABLES */ size = sizeof(mmu_short_pte_t) * MMU_C_TBL_SIZE * NUM_C_TABLES; mmuCbase = pmap_bootstrap_alloc(size); size = sizeof(mmu_short_dte_t) * MMU_B_TBL_SIZE * NUM_B_TABLES; mmuBbase = pmap_bootstrap_alloc(size); size = sizeof(mmu_long_dte_t) * MMU_A_TBL_SIZE * NUM_A_TABLES; mmuAbase = pmap_bootstrap_alloc(size); /* * Fill in the never-changing part of the kernel tables. * For simplicity, the kernel's mappings will be editable as a * flat array of page table entries at kernCbase. The * higher level 'A' and 'B' tables must be initialized to point * to this lower one. */ b = c = 0; /* * Invalidate all mappings below KERNBASE in the A table. * This area has already been zeroed out, but it is good * practice to explicitly show that we are interpreting * it as a list of A table descriptors. */ for (i = 0; i < MMU_TIA(KERNBASE3X); i++) { kernAbase[i].addr.raw = 0; } /* * Set up the kernel A and B tables so that they will reference the * correct spots in the contiguous table of PTEs allocated for the * kernel's virtual memory space. */ for (i = MMU_TIA(KERNBASE3X); i < MMU_A_TBL_SIZE; i++) { kernAbase[i].attr.raw = MMU_LONG_DTE_LU | MMU_LONG_DTE_SUPV | MMU_DT_SHORT; kernAbase[i].addr.raw = mmu_vtop(&kernBbase[b]); for (j = 0; j < MMU_B_TBL_SIZE; j++) { kernBbase[b + j].attr.raw = mmu_vtop(&kernCbase[c]) | MMU_DT_SHORT; c += MMU_C_TBL_SIZE; } b += MMU_B_TBL_SIZE; } pmap_alloc_usermmu(); /* Allocate user MMU tables. */ pmap_alloc_usertmgr(); /* Allocate user MMU table managers.*/ pmap_alloc_pv(); /* Allocate physical->virtual map. */ /* * We are now done with pmap_bootstrap_alloc(). Round up * `virtual_avail' to the nearest page, and set the flag * to prevent use of pmap_bootstrap_alloc() hereafter. */ pmap_bootstrap_aalign(PAGE_SIZE); bootstrap_alloc_enabled = false; /* * Now that we are done with pmap_bootstrap_alloc(), we * must save the virtual and physical addresses of the * end of the linearly mapped range, which are stored in * virtual_contig_end and avail_start, respectively. * These variables will never change after this point. */ virtual_contig_end = virtual_avail; avail_start = virtual_avail - KERNBASE3X; /* * `avail_next' is a running pointer used by pmap_next_page() to * keep track of the next available physical page to be handed * to the VM system during its initialization, in which it * asks for physical pages, one at a time. */ avail_next = avail_start; /* * Now allocate some virtual addresses, but not the physical pages * behind them. Note that virtual_avail is already page-aligned. * * tmp_vpages[] is an array of two virtual pages used for temporary * kernel mappings in the pmap module to facilitate various physical * address-oritented operations. */ tmp_vpages[0] = virtual_avail; virtual_avail += PAGE_SIZE; tmp_vpages[1] = virtual_avail; virtual_avail += PAGE_SIZE; /** Initialize the PV system **/ pmap_init_pv(); /* * Fill in the kernel_pmap structure and kernel_crp. */ kernAphys = mmu_vtop(kernAbase); kernel_pmap.pm_a_tmgr = NULL; kernel_pmap.pm_a_phys = kernAphys; kernel_pmap.pm_refcount = 1; /* always in use */ kernel_crp.rp_attr = MMU_LONG_DTE_LU | MMU_DT_LONG; kernel_crp.rp_addr = kernAphys; /* * Now pmap_enter_kernel() may be used safely and will be * the main interface used hereafter to modify the kernel's * virtual address space. Note that since we are still running * under the PROM's address table, none of these table modifications * actually take effect until pmap_takeover_mmu() is called. * * Note: Our tables do NOT have the PROM linear mappings! * Only the mappings created here exist in our tables, so * remember to map anything we expect to use. */ va = (vaddr_t)KERNBASE3X; pa = 0; /* * The first page of the kernel virtual address space is the msgbuf * page. The page attributes (data, non-cached) are set here, while * the address is assigned to this global pointer in cpu_startup(). * It is non-cached, mostly due to paranoia. */ pmap_enter_kernel(va, pa|PMAP_NC, VM_PROT_ALL); va += PAGE_SIZE; pa += PAGE_SIZE; /* Next page is used as the temporary stack. */ pmap_enter_kernel(va, pa, VM_PROT_ALL); va += PAGE_SIZE; pa += PAGE_SIZE; /* * Map all of the kernel's text segment as read-only and cacheable. * (Cacheable is implied by default). Unfortunately, the last bytes * of kernel text and the first bytes of kernel data will often be * sharing the same page. Therefore, the last page of kernel text * has to be mapped as read/write, to accommodate the data. */ eva = m68k_trunc_page((vaddr_t)etext); for (; va < eva; va += PAGE_SIZE, pa += PAGE_SIZE) pmap_enter_kernel(va, pa, VM_PROT_READ|VM_PROT_EXECUTE); /* * Map all of the kernel's data as read/write and cacheable. * This includes: data, BSS, symbols, and everything in the * contiguous memory used by pmap_bootstrap_alloc() */ for (; pa < avail_start; va += PAGE_SIZE, pa += PAGE_SIZE) pmap_enter_kernel(va, pa, VM_PROT_READ|VM_PROT_WRITE); /* * At this point we are almost ready to take over the MMU. But first * we must save the PROM's address space in our map, as we call its * routines and make references to its data later in the kernel. */ pmap_bootstrap_copyprom(); pmap_takeover_mmu(); pmap_bootstrap_setprom(); /* Notify the VM system of our page size. */ uvmexp.pagesize = PAGE_SIZE; uvm_md_init(); pmap_page_upload(); } /* pmap_alloc_usermmu INTERNAL ** * Called from pmap_bootstrap() to allocate MMU tables that will * eventually be used for user mappings. */ void pmap_alloc_usermmu(void) { /* XXX: Moved into caller. */ } /* pmap_alloc_pv INTERNAL ** * Called from pmap_bootstrap() to allocate the physical * to virtual mapping list. Each physical page of memory * in the system has a corresponding element in this list. */ void pmap_alloc_pv(void) { int i; unsigned int total_mem; /* * Allocate a pv_head structure for every page of physical * memory that will be managed by the system. Since memory on * the 3/80 is non-contiguous, we cannot arrive at a total page * count by subtraction of the lowest available address from the * highest, but rather we have to step through each memory * bank and add the number of pages in each to the total. * * At this time we also initialize the offset of each bank's * starting pv_head within the pv_head list so that the physical * memory state routines (pmap_is_referenced(), * pmap_is_modified(), et al.) can quickly find coresponding * pv_heads in spite of the non-contiguity. */ total_mem = 0; for (i = 0; i < SUN3X_NPHYS_RAM_SEGS; i++) { avail_mem[i].pmem_pvbase = m68k_btop(total_mem); total_mem += avail_mem[i].pmem_end - avail_mem[i].pmem_start; if (avail_mem[i].pmem_next == NULL) break; } pvbase = (pv_t *)pmap_bootstrap_alloc(sizeof(pv_t) * m68k_btop(total_phys_mem)); } /* pmap_alloc_usertmgr INTERNAL ** * Called from pmap_bootstrap() to allocate the structures which * facilitate management of user MMU tables. Each user MMU table * in the system has one such structure associated with it. */ void pmap_alloc_usertmgr(void) { /* Allocate user MMU table managers */ /* It would be a lot simpler to just make these BSS, but */ /* we may want to change their size at boot time... -j */ Atmgrbase = (a_tmgr_t *)pmap_bootstrap_alloc(sizeof(a_tmgr_t) * NUM_A_TABLES); Btmgrbase = (b_tmgr_t *)pmap_bootstrap_alloc(sizeof(b_tmgr_t) * NUM_B_TABLES); Ctmgrbase = (c_tmgr_t *)pmap_bootstrap_alloc(sizeof(c_tmgr_t) * NUM_C_TABLES); /* * Allocate PV list elements for the physical to virtual * mapping system. */ pvebase = (pv_elem_t *)pmap_bootstrap_alloc(sizeof(pv_elem_t) * (NUM_USER_PTES + NUM_KERN_PTES)); } /* pmap_bootstrap_copyprom() INTERNAL ** * Copy the PROM mappings into our own tables. Note, we * can use physical addresses until __bootstrap returns. */ void pmap_bootstrap_copyprom(void) { struct sunromvec *romp; int *mon_ctbl; mmu_short_pte_t *kpte; int i, len; romp = romVectorPtr; /* * Copy the mappings in SUN3X_MON_KDB_BASE...SUN3X_MONEND * Note: mon_ctbl[0] maps SUN3X_MON_KDB_BASE */ mon_ctbl = *romp->monptaddr; i = m68k_btop(SUN3X_MON_KDB_BASE - KERNBASE3X); kpte = &kernCbase[i]; len = m68k_btop(SUN3X_MONEND - SUN3X_MON_KDB_BASE); for (i = 0; i < len; i++) { kpte[i].attr.raw = mon_ctbl[i]; } /* * Copy the mappings at MON_DVMA_BASE (to the end). * Note, in here, mon_ctbl[0] maps MON_DVMA_BASE. * Actually, we only want the last page, which the * PROM has set up for use by the "ie" driver. * (The i82686 needs its SCP there.) * If we copy all the mappings, pmap_enter_kernel * may complain about finding valid PTEs that are * not recorded in our PV lists... */ mon_ctbl = *romp->shadowpteaddr; i = m68k_btop(SUN3X_MON_DVMA_BASE - KERNBASE3X); kpte = &kernCbase[i]; len = m68k_btop(SUN3X_MON_DVMA_SIZE); for (i = (len - 1); i < len; i++) { kpte[i].attr.raw = mon_ctbl[i]; } } /* pmap_takeover_mmu INTERNAL ** * Called from pmap_bootstrap() after it has copied enough of the * PROM mappings into the kernel map so that we can use our own * MMU table. */ void pmap_takeover_mmu(void) { loadcrp(&kernel_crp); } /* pmap_bootstrap_setprom() INTERNAL ** * Set the PROM mappings so it can see kernel space. * Note that physical addresses are used here, which * we can get away with because this runs with the * low 1GB set for transparent translation. */ void pmap_bootstrap_setprom(void) { mmu_long_dte_t *mon_dte; extern struct mmu_rootptr mon_crp; int i; mon_dte = (mmu_long_dte_t *)mon_crp.rp_addr; for (i = MMU_TIA(KERNBASE3X); i < MMU_TIA(KERN_END3X); i++) { mon_dte[i].attr.raw = kernAbase[i].attr.raw; mon_dte[i].addr.raw = kernAbase[i].addr.raw; } } /* pmap_init INTERFACE ** * Called at the end of vm_init() to set up the pmap system to go * into full time operation. All initialization of kernel_pmap * should be already done by now, so this should just do things * needed for user-level pmaps to work. */ void pmap_init(void) { /** Initialize the manager pools **/ TAILQ_INIT(&a_pool); TAILQ_INIT(&b_pool); TAILQ_INIT(&c_pool); /************************************************************** * Initialize all tmgr structures and MMU tables they manage. * **************************************************************/ /** Initialize A tables **/ pmap_init_a_tables(); /** Initialize B tables **/ pmap_init_b_tables(); /** Initialize C tables **/ pmap_init_c_tables(); /** Initialize the pmap pools **/ pool_init(&pmap_pmap_pool, sizeof(struct pmap), 0, 0, 0, "pmappl", &pool_allocator_nointr, IPL_NONE); } /* pmap_init_a_tables() INTERNAL ** * Initializes all A managers, their MMU A tables, and inserts * them into the A manager pool for use by the system. */ void pmap_init_a_tables(void) { int i; a_tmgr_t *a_tbl; for (i = 0; i < NUM_A_TABLES; i++) { /* Select the next available A manager from the pool */ a_tbl = &Atmgrbase[i]; /* * Clear its parent entry. Set its wired and valid * entry count to zero. */ a_tbl->at_parent = NULL; a_tbl->at_wcnt = a_tbl->at_ecnt = 0; /* Assign it the next available MMU A table from the pool */ a_tbl->at_dtbl = &mmuAbase[i * MMU_A_TBL_SIZE]; /* * Initialize the MMU A table with the table in the `lwp0', * or kernel, mapping. This ensures that every process has * the kernel mapped in the top part of its address space. */ memcpy(a_tbl->at_dtbl, kernAbase, MMU_A_TBL_SIZE * sizeof(mmu_long_dte_t)); /* * Finally, insert the manager into the A pool, * making it ready to be used by the system. */ TAILQ_INSERT_TAIL(&a_pool, a_tbl, at_link); } } /* pmap_init_b_tables() INTERNAL ** * Initializes all B table managers, their MMU B tables, and * inserts them into the B manager pool for use by the system. */ void pmap_init_b_tables(void) { int i, j; b_tmgr_t *b_tbl; for (i = 0; i < NUM_B_TABLES; i++) { /* Select the next available B manager from the pool */ b_tbl = &Btmgrbase[i]; b_tbl->bt_parent = NULL; /* clear its parent, */ b_tbl->bt_pidx = 0; /* parent index, */ b_tbl->bt_wcnt = 0; /* wired entry count, */ b_tbl->bt_ecnt = 0; /* valid entry count. */ /* Assign it the next available MMU B table from the pool */ b_tbl->bt_dtbl = &mmuBbase[i * MMU_B_TBL_SIZE]; /* Invalidate every descriptor in the table */ for (j = 0; j < MMU_B_TBL_SIZE; j++) b_tbl->bt_dtbl[j].attr.raw = MMU_DT_INVALID; /* Insert the manager into the B pool */ TAILQ_INSERT_TAIL(&b_pool, b_tbl, bt_link); } } /* pmap_init_c_tables() INTERNAL ** * Initializes all C table managers, their MMU C tables, and * inserts them into the C manager pool for use by the system. */ void pmap_init_c_tables(void) { int i, j; c_tmgr_t *c_tbl; for (i = 0; i < NUM_C_TABLES; i++) { /* Select the next available C manager from the pool */ c_tbl = &Ctmgrbase[i]; c_tbl->ct_parent = NULL; /* clear its parent, */ c_tbl->ct_pidx = 0; /* parent index, */ c_tbl->ct_wcnt = 0; /* wired entry count, */ c_tbl->ct_ecnt = 0; /* valid entry count, */ c_tbl->ct_pmap = NULL; /* parent pmap, */ c_tbl->ct_va = 0; /* base of managed range */ /* Assign it the next available MMU C table from the pool */ c_tbl->ct_dtbl = &mmuCbase[i * MMU_C_TBL_SIZE]; for (j = 0; j < MMU_C_TBL_SIZE; j++) c_tbl->ct_dtbl[j].attr.raw = MMU_DT_INVALID; TAILQ_INSERT_TAIL(&c_pool, c_tbl, ct_link); } } /* pmap_init_pv() INTERNAL ** * Initializes the Physical to Virtual mapping system. */ void pmap_init_pv(void) { int i; /* Initialize every PV head. */ for (i = 0; i < m68k_btop(total_phys_mem); i++) { pvbase[i].pv_idx = PVE_EOL; /* Indicate no mappings */ pvbase[i].pv_flags = 0; /* Zero out page flags */ } } /* is_managed INTERNAL ** * Determine if the given physical address is managed by the PV system. * Note that this logic assumes that no one will ask for the status of * addresses which lie in-between the memory banks on the 3/80. If they * do so, it will falsely report that it is managed. * * Note: A "managed" address is one that was reported to the VM system as * a "usable page" during system startup. As such, the VM system expects the * pmap module to keep an accurate track of the useage of those pages. * Any page not given to the VM system at startup does not exist (as far as * the VM system is concerned) and is therefore "unmanaged." Examples are * those pages which belong to the ROM monitor and the memory allocated before * the VM system was started. */ static INLINE bool is_managed(paddr_t pa) { if (pa >= avail_start && pa < avail_end) return true; else return false; } /* get_a_table INTERNAL ** * Retrieve and return a level A table for use in a user map. */ a_tmgr_t * get_a_table(void) { a_tmgr_t *tbl; pmap_t pmap; /* Get the top A table in the pool */ tbl = TAILQ_FIRST(&a_pool); if (tbl == NULL) { /* * XXX - Instead of panicking here and in other get_x_table * functions, we do have the option of sleeping on the head of * the table pool. Any function which updates the table pool * would then issue a wakeup() on the head, thus waking up any * processes waiting for a table. * * Actually, the place to sleep would be when some process * asks for a "wired" mapping that would run us short of * mapping resources. This design DEPENDS on always having * some mapping resources in the pool for stealing, so we * must make sure we NEVER let the pool become empty. -gwr */ panic("get_a_table: out of A tables."); } TAILQ_REMOVE(&a_pool, tbl, at_link); /* * If the table has a non-null parent pointer then it is in use. * Forcibly abduct it from its parent and clear its entries. * No re-entrancy worries here. This table would not be in the * table pool unless it was available for use. * * Note that the second argument to free_a_table() is false. This * indicates that the table should not be relinked into the A table * pool. That is a job for the function that called us. */ if (tbl->at_parent) { KASSERT(tbl->at_wcnt == 0); pmap = tbl->at_parent; free_a_table(tbl, false); pmap->pm_a_tmgr = NULL; pmap->pm_a_phys = kernAphys; } return tbl; } /* get_b_table INTERNAL ** * Return a level B table for use. */ b_tmgr_t * get_b_table(void) { b_tmgr_t *tbl; /* See 'get_a_table' for comments. */ tbl = TAILQ_FIRST(&b_pool); if (tbl == NULL) panic("get_b_table: out of B tables."); TAILQ_REMOVE(&b_pool, tbl, bt_link); if (tbl->bt_parent) { KASSERT(tbl->bt_wcnt == 0); tbl->bt_parent->at_dtbl[tbl->bt_pidx].attr.raw = MMU_DT_INVALID; tbl->bt_parent->at_ecnt--; free_b_table(tbl, false); } return tbl; } /* get_c_table INTERNAL ** * Return a level C table for use. */ c_tmgr_t * get_c_table(void) { c_tmgr_t *tbl; /* See 'get_a_table' for comments */ tbl = TAILQ_FIRST(&c_pool); if (tbl == NULL) panic("get_c_table: out of C tables."); TAILQ_REMOVE(&c_pool, tbl, ct_link); if (tbl->ct_parent) { KASSERT(tbl->ct_wcnt == 0); tbl->ct_parent->bt_dtbl[tbl->ct_pidx].attr.raw = MMU_DT_INVALID; tbl->ct_parent->bt_ecnt--; free_c_table(tbl, false); } return tbl; } /* * The following 'free_table' and 'steal_table' functions are called to * detach tables from their current obligations (parents and children) and * prepare them for reuse in another mapping. * * Free_table is used when the calling function will handle the fate * of the parent table, such as returning it to the free pool when it has * no valid entries. Functions that do not want to handle this should * call steal_table, in which the parent table's descriptors and entry * count are automatically modified when this table is removed. */ /* free_a_table INTERNAL ** * Unmaps the given A table and all child tables from their current * mappings. Returns the number of pages that were invalidated. * If 'relink' is true, the function will return the table to the head * of the available table pool. * * Cache note: The MC68851 will automatically flush all * descriptors derived from a given A table from its * Automatic Translation Cache (ATC) if we issue a * 'PFLUSHR' instruction with the base address of the * table. This function should do, and does so. * Note note: We are using an MC68030 - there is no * PFLUSHR. */ int free_a_table(a_tmgr_t *a_tbl, bool relink) { int i, removed_cnt; mmu_long_dte_t *dte; mmu_short_dte_t *dtbl; b_tmgr_t *b_tbl; uint8_t at_wired, bt_wired; /* * Flush the ATC cache of all cached descriptors derived * from this table. * Sun3x does not use 68851's cached table feature * flush_atc_crp(mmu_vtop(a_tbl->dte)); */ /* * Remove any pending cache flushes that were designated * for the pmap this A table belongs to. * a_tbl->parent->atc_flushq[0] = 0; * Not implemented in sun3x. */ /* * All A tables in the system should retain a map for the * kernel. If the table contains any valid descriptors * (other than those for the kernel area), invalidate them all, * stopping short of the kernel's entries. */ removed_cnt = 0; at_wired = a_tbl->at_wcnt; if (a_tbl->at_ecnt) { dte = a_tbl->at_dtbl; for (i = 0; i < MMU_TIA(KERNBASE3X); i++) { /* * If a table entry points to a valid B table, free * it and its children. */ if (MMU_VALID_DT(dte[i])) { /* * The following block does several things, * from innermost expression to the * outermost: * 1) It extracts the base (cc 1996) * address of the B table pointed * to in the A table entry dte[i]. * 2) It converts this base address into * the virtual address it can be * accessed with. (all MMU tables point * to physical addresses.) * 3) It finds the corresponding manager * structure which manages this MMU table. * 4) It frees the manager structure. * (This frees the MMU table and all * child tables. See 'free_b_table' for * details.) */ dtbl = mmu_ptov(dte[i].addr.raw); b_tbl = mmuB2tmgr(dtbl); bt_wired = b_tbl->bt_wcnt; removed_cnt += free_b_table(b_tbl, true); if (bt_wired) a_tbl->at_wcnt--; dte[i].attr.raw = MMU_DT_INVALID; } } a_tbl->at_ecnt = 0; } KASSERT(a_tbl->at_wcnt == 0); if (relink) { a_tbl->at_parent = NULL; if (!at_wired) TAILQ_REMOVE(&a_pool, a_tbl, at_link); TAILQ_INSERT_HEAD(&a_pool, a_tbl, at_link); } return removed_cnt; } /* free_b_table INTERNAL ** * Unmaps the given B table and all its children from their current * mappings. Returns the number of pages that were invalidated. * (For comments, see 'free_a_table()'). */ int free_b_table(b_tmgr_t *b_tbl, bool relink) { int i, removed_cnt; mmu_short_dte_t *dte; mmu_short_pte_t *dtbl; c_tmgr_t *c_tbl; uint8_t bt_wired, ct_wired; removed_cnt = 0; bt_wired = b_tbl->bt_wcnt; if (b_tbl->bt_ecnt) { dte = b_tbl->bt_dtbl; for (i = 0; i < MMU_B_TBL_SIZE; i++) { if (MMU_VALID_DT(dte[i])) { dtbl = mmu_ptov(MMU_DTE_PA(dte[i])); c_tbl = mmuC2tmgr(dtbl); ct_wired = c_tbl->ct_wcnt; removed_cnt += free_c_table(c_tbl, true); if (ct_wired) b_tbl->bt_wcnt--; dte[i].attr.raw = MMU_DT_INVALID; } } b_tbl->bt_ecnt = 0; } KASSERT(b_tbl->bt_wcnt == 0); if (relink) { b_tbl->bt_parent = NULL; if (!bt_wired) TAILQ_REMOVE(&b_pool, b_tbl, bt_link); TAILQ_INSERT_HEAD(&b_pool, b_tbl, bt_link); } return removed_cnt; } /* free_c_table INTERNAL ** * Unmaps the given C table from use and returns it to the pool for * re-use. Returns the number of pages that were invalidated. * * This function preserves any physical page modification information * contained in the page descriptors within the C table by calling * 'pmap_remove_pte().' */ int free_c_table(c_tmgr_t *c_tbl, bool relink) { mmu_short_pte_t *c_pte; int i, removed_cnt; uint8_t ct_wired; removed_cnt = 0; ct_wired = c_tbl->ct_wcnt; if (c_tbl->ct_ecnt) { for (i = 0; i < MMU_C_TBL_SIZE; i++) { c_pte = &c_tbl->ct_dtbl[i]; if (MMU_VALID_DT(*c_pte)) { if (c_pte->attr.raw & MMU_SHORT_PTE_WIRED) c_tbl->ct_wcnt--; pmap_remove_pte(c_pte); removed_cnt++; } } c_tbl->ct_ecnt = 0; } KASSERT(c_tbl->ct_wcnt == 0); if (relink) { c_tbl->ct_parent = NULL; if (!ct_wired) TAILQ_REMOVE(&c_pool, c_tbl, ct_link); TAILQ_INSERT_HEAD(&c_pool, c_tbl, ct_link); } return removed_cnt; } /* pmap_remove_pte INTERNAL ** * Unmap the given pte and preserve any page modification * information by transfering it to the pv head of the * physical page it maps to. This function does not update * any reference counts because it is assumed that the calling * function will do so. */ void pmap_remove_pte(mmu_short_pte_t *pte) { u_short pv_idx, targ_idx; paddr_t pa; pv_t *pv; pa = MMU_PTE_PA(*pte); if (is_managed(pa)) { pv = pa2pv(pa); targ_idx = pteidx(pte); /* Index of PTE being removed */ /* * If the PTE being removed is the first (or only) PTE in * the list of PTEs currently mapped to this page, remove the * PTE by changing the index found on the PV head. Otherwise * a linear search through the list will have to be executed * in order to find the PVE which points to the PTE being * removed, so that it may be modified to point to its new * neighbor. */ pv_idx = pv->pv_idx; /* Index of first PTE in PV list */ if (pv_idx == targ_idx) { pv->pv_idx = pvebase[targ_idx].pve_next; } else { /* * Find the PV element pointing to the target * element. Note: may have pv_idx==PVE_EOL */ for (;;) { if (pv_idx == PVE_EOL) { goto pv_not_found; } if (pvebase[pv_idx].pve_next == targ_idx) break; pv_idx = pvebase[pv_idx].pve_next; } /* * At this point, pv_idx is the index of the PV * element just before the target element in the list. * Unlink the target. */ pvebase[pv_idx].pve_next = pvebase[targ_idx].pve_next; } /* * Save the mod/ref bits of the pte by simply * ORing the entire pte onto the pv_flags member * of the pv structure. * There is no need to use a separate bit pattern * for usage information on the pv head than that * which is used on the MMU ptes. */ pv_not_found: pv->pv_flags |= (u_short) pte->attr.raw; } pte->attr.raw = MMU_DT_INVALID; } /* pmap_stroll INTERNAL ** * Retrieve the addresses of all table managers involved in the mapping of * the given virtual address. If the table walk completed successfully, * return true. If it was only partially successful, return false. * The table walk performed by this function is important to many other * functions in this module. * * Note: This function ought to be easier to read. */ bool pmap_stroll(pmap_t pmap, vaddr_t va, a_tmgr_t **a_tbl, b_tmgr_t **b_tbl, c_tmgr_t **c_tbl, mmu_short_pte_t **pte, int *a_idx, int *b_idx, int *pte_idx) { mmu_long_dte_t *a_dte; /* A: long descriptor table */ mmu_short_dte_t *b_dte; /* B: short descriptor table */ if (pmap == pmap_kernel()) return false; /* Does the given pmap have its own A table? */ *a_tbl = pmap->pm_a_tmgr; if (*a_tbl == NULL) return false; /* No. Return unknown. */ /* Does the A table have a valid B table * under the corresponding table entry? */ *a_idx = MMU_TIA(va); a_dte = &((*a_tbl)->at_dtbl[*a_idx]); if (!MMU_VALID_DT(*a_dte)) return false; /* No. Return unknown. */ /* Yes. Extract B table from the A table. */ *b_tbl = mmuB2tmgr(mmu_ptov(a_dte->addr.raw)); /* * Does the B table have a valid C table * under the corresponding table entry? */ *b_idx = MMU_TIB(va); b_dte = &((*b_tbl)->bt_dtbl[*b_idx]); if (!MMU_VALID_DT(*b_dte)) return false; /* No. Return unknown. */ /* Yes. Extract C table from the B table. */ *c_tbl = mmuC2tmgr(mmu_ptov(MMU_DTE_PA(*b_dte))); *pte_idx = MMU_TIC(va); *pte = &((*c_tbl)->ct_dtbl[*pte_idx]); return true; } /* pmap_enter INTERFACE ** * Called by the kernel to map a virtual address * to a physical address in the given process map. * * Note: this function should apply an exclusive lock * on the pmap system for its duration. (it certainly * would save my hair!!) * This function ought to be easier to read. */ int pmap_enter(pmap_t pmap, vaddr_t va, paddr_t pa, vm_prot_t prot, u_int flags) { bool insert, managed; /* Marks the need for PV insertion.*/ u_short nidx; /* PV list index */ int mapflags; /* Flags for the mapping (see NOTE1) */ u_int a_idx, b_idx, pte_idx; /* table indices */ a_tmgr_t *a_tbl; /* A: long descriptor table manager */ b_tmgr_t *b_tbl; /* B: short descriptor table manager */ c_tmgr_t *c_tbl; /* C: short page table manager */ mmu_long_dte_t *a_dte; /* A: long descriptor table */ mmu_short_dte_t *b_dte; /* B: short descriptor table */ mmu_short_pte_t *c_pte; /* C: short page descriptor table */ pv_t *pv; /* pv list head */ bool wired; /* is the mapping to be wired? */ enum {NONE, NEWA, NEWB, NEWC} llevel; /* used at end */ if (pmap == pmap_kernel()) { pmap_enter_kernel(va, pa, prot); return 0; } /* * Determine if the mapping should be wired. */ wired = ((flags & PMAP_WIRED) != 0); /* * NOTE1: * * On November 13, 1999, someone changed the pmap_enter() API such * that it now accepts a 'flags' argument. This new argument * contains bit-flags for the architecture-independent (UVM) system to * use in signalling certain mapping requirements to the architecture- * dependent (pmap) system. The argument it replaces, 'wired', is now * one of the flags within it. * * In addition to flags signaled by the architecture-independent * system, parts of the architecture-dependent section of the sun3x * kernel pass their own flags in the lower, unused bits of the * physical address supplied to this function. These flags are * extracted and stored in the temporary variable 'mapflags'. * * Extract sun3x specific flags from the physical address. */ mapflags = (pa & ~MMU_PAGE_MASK); pa &= MMU_PAGE_MASK; /* * Determine if the physical address being mapped is on-board RAM. * Any other area of the address space is likely to belong to a * device and hence it would be disasterous to cache its contents. */ if ((managed = is_managed(pa)) == false) mapflags |= PMAP_NC; /* * For user mappings we walk along the MMU tables of the given * pmap, reaching a PTE which describes the virtual page being * mapped or changed. If any level of the walk ends in an invalid * entry, a table must be allocated and the entry must be updated * to point to it. * There is a bit of confusion as to whether this code must be * re-entrant. For now we will assume it is. To support * re-entrancy we must unlink tables from the table pool before * we assume we may use them. Tables are re-linked into the pool * when we are finished with them at the end of the function. * But I don't feel like doing that until we have proof that this * needs to be re-entrant. * 'llevel' records which tables need to be relinked. */ llevel = NONE; /* * Step 1 - Retrieve the A table from the pmap. If it has no * A table, allocate a new one from the available pool. */ a_tbl = pmap->pm_a_tmgr; if (a_tbl == NULL) { /* * This pmap does not currently have an A table. Allocate * a new one. */ a_tbl = get_a_table(); a_tbl->at_parent = pmap; /* * Assign this new A table to the pmap, and calculate its * physical address so that loadcrp() can be used to make * the table active. */ pmap->pm_a_tmgr = a_tbl; pmap->pm_a_phys = mmu_vtop(a_tbl->at_dtbl); /* * If the process receiving a new A table is the current * process, we are responsible for setting the MMU so that * it becomes the current address space. This only adds * new mappings, so no need to flush anything. */ if (pmap == current_pmap()) { kernel_crp.rp_addr = pmap->pm_a_phys; loadcrp(&kernel_crp); } if (!wired) llevel = NEWA; } else { /* * Use the A table already allocated for this pmap. * Unlink it from the A table pool if necessary. */ if (wired && !a_tbl->at_wcnt) TAILQ_REMOVE(&a_pool, a_tbl, at_link); } /* * Step 2 - Walk into the B table. If there is no valid B table, * allocate one. */ a_idx = MMU_TIA(va); /* Calculate the TIA of the VA. */ a_dte = &a_tbl->at_dtbl[a_idx]; /* Retrieve descriptor from table */ if (MMU_VALID_DT(*a_dte)) { /* Is the descriptor valid? */ /* The descriptor is valid. Use the B table it points to. */ /************************************* * a_idx * * v * * a_tbl -> +-+-+-+-+-+-+-+-+-+-+-+- * * | | | | | | | | | | | | * * +-+-+-+-+-+-+-+-+-+-+-+- * * | * * \- b_tbl -> +-+- * * | | * * +-+- * *************************************/ b_dte = mmu_ptov(a_dte->addr.raw); b_tbl = mmuB2tmgr(b_dte); /* * If the requested mapping must be wired, but this table * being used to map it is not, the table must be removed * from the available pool and its wired entry count * incremented. */ if (wired && !b_tbl->bt_wcnt) { TAILQ_REMOVE(&b_pool, b_tbl, bt_link); a_tbl->at_wcnt++; } } else { /* The descriptor is invalid. Allocate a new B table. */ b_tbl = get_b_table(); /* Point the parent A table descriptor to this new B table. */ a_dte->addr.raw = mmu_vtop(b_tbl->bt_dtbl); a_dte->attr.raw = MMU_LONG_DTE_LU | MMU_DT_SHORT; a_tbl->at_ecnt++; /* Update parent's valid entry count */ /* Create the necessary back references to the parent table */ b_tbl->bt_parent = a_tbl; b_tbl->bt_pidx = a_idx; /* * If this table is to be wired, make sure the parent A table * wired count is updated to reflect that it has another wired * entry. */ if (wired) a_tbl->at_wcnt++; else if (llevel == NONE) llevel = NEWB; } /* * Step 3 - Walk into the C table, if there is no valid C table, * allocate one. */ b_idx = MMU_TIB(va); /* Calculate the TIB of the VA */ b_dte = &b_tbl->bt_dtbl[b_idx]; /* Retrieve descriptor from table */ if (MMU_VALID_DT(*b_dte)) { /* Is the descriptor valid? */ /* The descriptor is valid. Use the C table it points to. */ /************************************** * c_idx * * | v * * \- b_tbl -> +-+-+-+-+-+-+-+-+-+-+- * * | | | | | | | | | | | * * +-+-+-+-+-+-+-+-+-+-+- * * | * * \- c_tbl -> +-+-- * * | | | * * +-+-- * **************************************/ c_pte = mmu_ptov(MMU_PTE_PA(*b_dte)); c_tbl = mmuC2tmgr(c_pte); /* If mapping is wired and table is not */ if (wired && !c_tbl->ct_wcnt) { TAILQ_REMOVE(&c_pool, c_tbl, ct_link); b_tbl->bt_wcnt++; } } else { /* The descriptor is invalid. Allocate a new C table. */ c_tbl = get_c_table(); /* Point the parent B table descriptor to this new C table. */ b_dte->attr.raw = mmu_vtop(c_tbl->ct_dtbl); b_dte->attr.raw |= MMU_DT_SHORT; b_tbl->bt_ecnt++; /* Update parent's valid entry count */ /* Create the necessary back references to the parent table */ c_tbl->ct_parent = b_tbl; c_tbl->ct_pidx = b_idx; /* * Store the pmap and base virtual managed address for faster * retrieval in the PV functions. */ c_tbl->ct_pmap = pmap; c_tbl->ct_va = (va & (MMU_TIA_MASK|MMU_TIB_MASK)); /* * If this table is to be wired, make sure the parent B table * wired count is updated to reflect that it has another wired * entry. */ if (wired) b_tbl->bt_wcnt++; else if (llevel == NONE) llevel = NEWC; } /* * Step 4 - Deposit a page descriptor (PTE) into the appropriate * slot of the C table, describing the PA to which the VA is mapped. */ pte_idx = MMU_TIC(va); c_pte = &c_tbl->ct_dtbl[pte_idx]; if (MMU_VALID_DT(*c_pte)) { /* Is the entry currently valid? */ /* * The PTE is currently valid. This particular call * is just a synonym for one (or more) of the following * operations: * change protection of a page * change wiring status of a page * remove the mapping of a page */ /* First check if this is a wiring operation. */ if (c_pte->attr.raw & MMU_SHORT_PTE_WIRED) { /* * The existing mapping is wired, so adjust wired * entry count here. If new mapping is still wired, * wired entry count will be incremented again later. */ c_tbl->ct_wcnt--; if (!wired) { /* * The mapping of this PTE is being changed * from wired to unwired. * Adjust wired entry counts in each table and * set llevel flag to put unwired tables back * into the active pool. */ if (c_tbl->ct_wcnt == 0) { llevel = NEWC; if (--b_tbl->bt_wcnt == 0) { llevel = NEWB; if (--a_tbl->at_wcnt == 0) { llevel = NEWA; } } } } } /* Is the new address the same as the old? */ if (MMU_PTE_PA(*c_pte) == pa) { /* * Yes, mark that it does not need to be reinserted * into the PV list. */ insert = false; /* * Clear all but the modified, referenced and wired * bits on the PTE. */ c_pte->attr.raw &= (MMU_SHORT_PTE_M | MMU_SHORT_PTE_USED | MMU_SHORT_PTE_WIRED); } else { /* No, remove the old entry */ pmap_remove_pte(c_pte); insert = true; } /* * TLB flush is only necessary if modifying current map. * However, in pmap_enter(), the pmap almost always IS * the current pmap, so don't even bother to check. */ TBIS(va); } else { /* * The PTE is invalid. Increment the valid entry count in * the C table manager to reflect the addition of a new entry. */ c_tbl->ct_ecnt++; /* XXX - temporarily make sure the PTE is cleared. */ c_pte->attr.raw = 0; /* It will also need to be inserted into the PV list. */ insert = true; } /* * If page is changing from unwired to wired status, set an unused bit * within the PTE to indicate that it is wired. Also increment the * wired entry count in the C table manager. */ if (wired) { c_pte->attr.raw |= MMU_SHORT_PTE_WIRED; c_tbl->ct_wcnt++; } /* * Map the page, being careful to preserve modify/reference/wired * bits. At this point it is assumed that the PTE either has no bits * set, or if there are set bits, they are only modified, reference or * wired bits. If not, the following statement will cause erratic * behavior. */ #ifdef PMAP_DEBUG if (c_pte->attr.raw & ~(MMU_SHORT_PTE_M | MMU_SHORT_PTE_USED | MMU_SHORT_PTE_WIRED)) { printf("pmap_enter: junk left in PTE at %p\n", c_pte); Debugger(); } #endif c_pte->attr.raw |= ((u_long) pa | MMU_DT_PAGE); /* * If the mapping should be read-only, set the write protect * bit in the PTE. */ if (!(prot & VM_PROT_WRITE)) c_pte->attr.raw |= MMU_SHORT_PTE_WP; /* * Mark the PTE as used and/or modified as specified by the flags arg. */ if (flags & VM_PROT_ALL) { c_pte->attr.raw |= MMU_SHORT_PTE_USED; if (flags & VM_PROT_WRITE) { c_pte->attr.raw |= MMU_SHORT_PTE_M; } } /* * If the mapping should be cache inhibited (indicated by the flag * bits found on the lower order of the physical address.) * mark the PTE as a cache inhibited page. */ if (mapflags & PMAP_NC) c_pte->attr.raw |= MMU_SHORT_PTE_CI; /* * If the physical address being mapped is managed by the PV * system then link the pte into the list of pages mapped to that * address. */ if (insert && managed) { pv = pa2pv(pa); nidx = pteidx(c_pte); pvebase[nidx].pve_next = pv->pv_idx; pv->pv_idx = nidx; } /* Move any allocated or unwired tables back into the active pool. */ switch (llevel) { case NEWA: TAILQ_INSERT_TAIL(&a_pool, a_tbl, at_link); /* FALLTHROUGH */ case NEWB: TAILQ_INSERT_TAIL(&b_pool, b_tbl, bt_link); /* FALLTHROUGH */ case NEWC: TAILQ_INSERT_TAIL(&c_pool, c_tbl, ct_link); /* FALLTHROUGH */ default: break; } return 0; } /* pmap_enter_kernel INTERNAL ** * Map the given virtual address to the given physical address within the * kernel address space. This function exists because the kernel map does * not do dynamic table allocation. It consists of a contiguous array of ptes * and can be edited directly without the need to walk through any tables. * * XXX: "Danger, Will Robinson!" * Note that the kernel should never take a fault on any page * between [ KERNBASE .. virtual_avail ] and this is checked in * trap.c for kernel-mode MMU faults. This means that mappings * created in that range must be implicily wired. -gwr */ void pmap_enter_kernel(vaddr_t va, paddr_t pa, vm_prot_t prot) { bool was_valid, insert; u_short pte_idx; int flags; mmu_short_pte_t *pte; pv_t *pv; paddr_t old_pa; flags = (pa & ~MMU_PAGE_MASK); pa &= MMU_PAGE_MASK; if (is_managed(pa)) insert = true; else insert = false; /* * Calculate the index of the PTE being modified. */ pte_idx = (u_long)m68k_btop(va - KERNBASE3X); /* This array is traditionally named "Sysmap" */ pte = &kernCbase[pte_idx]; if (MMU_VALID_DT(*pte)) { was_valid = true; /* * If the PTE already maps a different * physical address, umap and pv_unlink. */ old_pa = MMU_PTE_PA(*pte); if (pa != old_pa) pmap_remove_pte(pte); else { /* * Old PA and new PA are the same. No need to * relink the mapping within the PV list. */ insert = false; /* * Save any mod/ref bits on the PTE. */ pte->attr.raw &= (MMU_SHORT_PTE_USED|MMU_SHORT_PTE_M); } } else { pte->attr.raw = MMU_DT_INVALID; was_valid = false; } /* * Map the page. Being careful to preserve modified/referenced bits * on the PTE. */ pte->attr.raw |= (pa | MMU_DT_PAGE); if (!(prot & VM_PROT_WRITE)) /* If access should be read-only */ pte->attr.raw |= MMU_SHORT_PTE_WP; if (flags & PMAP_NC) pte->attr.raw |= MMU_SHORT_PTE_CI; if (was_valid) TBIS(va); /* * Insert the PTE into the PV system, if need be. */ if (insert) { pv = pa2pv(pa); pvebase[pte_idx].pve_next = pv->pv_idx; pv->pv_idx = pte_idx; } } void pmap_kenter_pa(vaddr_t va, paddr_t pa, vm_prot_t prot, u_int flags) { mmu_short_pte_t *pte; u_int mapflags; /* XXX: MD PMAP_NC should be replaced by MI PMAP_NOCACHE in flags. */ mapflags = (pa & ~MMU_PAGE_MASK); if ((mapflags & PMAP_NC) != 0) flags |= PMAP_NOCACHE; /* This array is traditionally named "Sysmap" */ pte = &kernCbase[(u_long)m68k_btop(va - KERNBASE3X)]; KASSERT(!MMU_VALID_DT(*pte)); pte->attr.raw = MMU_DT_INVALID | MMU_DT_PAGE | (pa & MMU_PAGE_MASK); if (!(prot & VM_PROT_WRITE)) pte->attr.raw |= MMU_SHORT_PTE_WP; if ((flags & PMAP_NOCACHE) != 0) pte->attr.raw |= MMU_SHORT_PTE_CI; } void pmap_kremove(vaddr_t va, vsize_t len) { int idx, eidx; #ifdef PMAP_DEBUG if ((va & PGOFSET) || (len & PGOFSET)) panic("pmap_kremove: alignment"); #endif idx = m68k_btop(va - KERNBASE3X); eidx = m68k_btop(va + len - KERNBASE3X); while (idx < eidx) { kernCbase[idx++].attr.raw = MMU_DT_INVALID; TBIS(va); va += PAGE_SIZE; } } /* pmap_map INTERNAL ** * Map a contiguous range of physical memory into a contiguous range of * the kernel virtual address space. * * Used for device mappings and early mapping of the kernel text/data/bss. * Returns the first virtual address beyond the end of the range. */ vaddr_t pmap_map(vaddr_t va, paddr_t pa, paddr_t endpa, int prot) { int sz; sz = endpa - pa; do { pmap_enter_kernel(va, pa, prot); va += PAGE_SIZE; pa += PAGE_SIZE; sz -= PAGE_SIZE; } while (sz > 0); pmap_update(pmap_kernel()); return va; } /* pmap_protect_kernel INTERNAL ** * Apply the given protection code to a kernel address range. */ static INLINE void pmap_protect_kernel(vaddr_t startva, vaddr_t endva, vm_prot_t prot) { vaddr_t va; mmu_short_pte_t *pte; pte = &kernCbase[(unsigned long) m68k_btop(startva - KERNBASE3X)]; for (va = startva; va < endva; va += PAGE_SIZE, pte++) { if (MMU_VALID_DT(*pte)) { switch (prot) { case VM_PROT_ALL: break; case VM_PROT_EXECUTE: case VM_PROT_READ: case VM_PROT_READ|VM_PROT_EXECUTE: pte->attr.raw |= MMU_SHORT_PTE_WP; break; case VM_PROT_NONE: /* this is an alias for 'pmap_remove_kernel' */ pmap_remove_pte(pte); break; default: break; } /* * since this is the kernel, immediately flush any cached * descriptors for this address. */ TBIS(va); } } } /* pmap_protect INTERFACE ** * Apply the given protection to the given virtual address range within * the given map. * * It is ok for the protection applied to be stronger than what is * specified. We use this to our advantage when the given map has no * mapping for the virtual address. By skipping a page when this * is discovered, we are effectively applying a protection of VM_PROT_NONE, * and therefore do not need to map the page just to apply a protection * code. Only pmap_enter() needs to create new mappings if they do not exist. * * XXX - This function could be speeded up by using pmap_stroll() for inital * setup, and then manual scrolling in the for() loop. */ void pmap_protect(pmap_t pmap, vaddr_t startva, vaddr_t endva, vm_prot_t prot) { bool iscurpmap; int a_idx, b_idx, c_idx; a_tmgr_t *a_tbl; b_tmgr_t *b_tbl; c_tmgr_t *c_tbl; mmu_short_pte_t *pte; if (pmap == pmap_kernel()) { pmap_protect_kernel(startva, endva, prot); return; } /* * In this particular pmap implementation, there are only three * types of memory protection: 'all' (read/write/execute), * 'read-only' (read/execute) and 'none' (no mapping.) * It is not possible for us to treat 'executable' as a separate * protection type. Therefore, protection requests that seek to * remove execute permission while retaining read or write, and those * that make little sense (write-only for example) are ignored. */ switch (prot) { case VM_PROT_NONE: /* * A request to apply the protection code of * 'VM_PROT_NONE' is a synonym for pmap_remove(). */ pmap_remove(pmap, startva, endva); return; case VM_PROT_EXECUTE: case VM_PROT_READ: case VM_PROT_READ|VM_PROT_EXECUTE: /* continue */ break; case VM_PROT_WRITE: case VM_PROT_WRITE|VM_PROT_READ: case VM_PROT_WRITE|VM_PROT_EXECUTE: case VM_PROT_ALL: /* None of these should happen in a sane system. */ return; } /* * If the pmap has no A table, it has no mappings and therefore * there is nothing to protect. */ if ((a_tbl = pmap->pm_a_tmgr) == NULL) return; a_idx = MMU_TIA(startva); b_idx = MMU_TIB(startva); c_idx = MMU_TIC(startva); b_tbl = NULL; c_tbl = NULL; iscurpmap = (pmap == current_pmap()); while (startva < endva) { if (b_tbl || MMU_VALID_DT(a_tbl->at_dtbl[a_idx])) { if (b_tbl == NULL) { b_tbl = (b_tmgr_t *) a_tbl->at_dtbl[a_idx].addr.raw; b_tbl = mmu_ptov((vaddr_t)b_tbl); b_tbl = mmuB2tmgr((mmu_short_dte_t *)b_tbl); } if (c_tbl || MMU_VALID_DT(b_tbl->bt_dtbl[b_idx])) { if (c_tbl == NULL) { c_tbl = (c_tmgr_t *) MMU_DTE_PA(b_tbl->bt_dtbl[b_idx]); c_tbl = mmu_ptov((vaddr_t)c_tbl); c_tbl = mmuC2tmgr((mmu_short_pte_t *)c_tbl); } if (MMU_VALID_DT(c_tbl->ct_dtbl[c_idx])) { pte = &c_tbl->ct_dtbl[c_idx]; /* make the mapping read-only */ pte->attr.raw |= MMU_SHORT_PTE_WP; /* * If we just modified the current address space, * flush any translations for the modified page from * the translation cache and any data from it in the * data cache. */ if (iscurpmap) TBIS(startva); } startva += PAGE_SIZE; if (++c_idx >= MMU_C_TBL_SIZE) { /* exceeded C table? */ c_tbl = NULL; c_idx = 0; if (++b_idx >= MMU_B_TBL_SIZE) { /* exceeded B table? */ b_tbl = NULL; b_idx = 0; } } } else { /* C table wasn't valid */ c_tbl = NULL; c_idx = 0; startva += MMU_TIB_RANGE; if (++b_idx >= MMU_B_TBL_SIZE) { /* exceeded B table? */ b_tbl = NULL; b_idx = 0; } } /* C table */ } else { /* B table wasn't valid */ b_tbl = NULL; b_idx = 0; startva += MMU_TIA_RANGE; a_idx++; } /* B table */ } } /* pmap_unwire INTERFACE ** * Clear the wired attribute of the specified page. * * This function is called from vm_fault.c to unwire * a mapping. */ void pmap_unwire(pmap_t pmap, vaddr_t va) { int a_idx, b_idx, c_idx; a_tmgr_t *a_tbl; b_tmgr_t *b_tbl; c_tmgr_t *c_tbl; mmu_short_pte_t *pte; /* Kernel mappings always remain wired. */ if (pmap == pmap_kernel()) return; /* * Walk through the tables. If the walk terminates without * a valid PTE then the address wasn't wired in the first place. * Return immediately. */ if (pmap_stroll(pmap, va, &a_tbl, &b_tbl, &c_tbl, &pte, &a_idx, &b_idx, &c_idx) == false) return; /* Is the PTE wired? If not, return. */ if (!(pte->attr.raw & MMU_SHORT_PTE_WIRED)) return; /* Remove the wiring bit. */ pte->attr.raw &= ~(MMU_SHORT_PTE_WIRED); /* * Decrement the wired entry count in the C table. * If it reaches zero the following things happen: * 1. The table no longer has any wired entries and is considered * unwired. * 2. It is placed on the available queue. * 3. The parent table's wired entry count is decremented. * 4. If it reaches zero, this process repeats at step 1 and * stops at after reaching the A table. */ if (--c_tbl->ct_wcnt == 0) { TAILQ_INSERT_TAIL(&c_pool, c_tbl, ct_link); if (--b_tbl->bt_wcnt == 0) { TAILQ_INSERT_TAIL(&b_pool, b_tbl, bt_link); if (--a_tbl->at_wcnt == 0) { TAILQ_INSERT_TAIL(&a_pool, a_tbl, at_link); } } } } /* pmap_copy INTERFACE ** * Copy the mappings of a range of addresses in one pmap, into * the destination address of another. * * This routine is advisory. Should we one day decide that MMU tables * may be shared by more than one pmap, this function should be used to * link them together. Until that day however, we do nothing. */ void pmap_copy(pmap_t pmap_a, pmap_t pmap_b, vaddr_t dst, vsize_t len, vaddr_t src) { /* not implemented. */ } /* pmap_copy_page INTERFACE ** * Copy the contents of one physical page into another. * * This function makes use of two virtual pages allocated in pmap_bootstrap() * to map the two specified physical pages into the kernel address space. * * Note: We could use the transparent translation registers to make the * mappings. If we do so, be sure to disable interrupts before using them. */ void pmap_copy_page(paddr_t srcpa, paddr_t dstpa) { vaddr_t srcva, dstva; int s; srcva = tmp_vpages[0]; dstva = tmp_vpages[1]; s = splvm(); #ifdef DIAGNOSTIC if (tmp_vpages_inuse++) panic("pmap_copy_page: temporary vpages are in use."); #endif /* Map pages as non-cacheable to avoid cache polution? */ pmap_kenter_pa(srcva, srcpa, VM_PROT_READ, 0); pmap_kenter_pa(dstva, dstpa, VM_PROT_READ | VM_PROT_WRITE, 0); /* Hand-optimized version of memcpy(dst, src, PAGE_SIZE) */ copypage((char *)srcva, (char *)dstva); pmap_kremove(srcva, PAGE_SIZE); pmap_kremove(dstva, PAGE_SIZE); #ifdef DIAGNOSTIC --tmp_vpages_inuse; #endif splx(s); } /* pmap_zero_page INTERFACE ** * Zero the contents of the specified physical page. * * Uses one of the virtual pages allocated in pmap_boostrap() * to map the specified page into the kernel address space. */ void pmap_zero_page(paddr_t dstpa) { vaddr_t dstva; int s; dstva = tmp_vpages[1]; s = splvm(); #ifdef DIAGNOSTIC if (tmp_vpages_inuse++) panic("pmap_zero_page: temporary vpages are in use."); #endif /* The comments in pmap_copy_page() above apply here also. */ pmap_kenter_pa(dstva, dstpa, VM_PROT_READ | VM_PROT_WRITE, 0); /* Hand-optimized version of memset(ptr, 0, PAGE_SIZE) */ zeropage((char *)dstva); pmap_kremove(dstva, PAGE_SIZE); #ifdef DIAGNOSTIC --tmp_vpages_inuse; #endif splx(s); } /* pmap_pinit INTERNAL ** * Initialize a pmap structure. */ static INLINE void pmap_pinit(pmap_t pmap) { memset(pmap, 0, sizeof(struct pmap)); pmap->pm_a_tmgr = NULL; pmap->pm_a_phys = kernAphys; pmap->pm_refcount = 1; } /* pmap_create INTERFACE ** * Create and return a pmap structure. */ pmap_t pmap_create(void) { pmap_t pmap; pmap = pool_get(&pmap_pmap_pool, PR_WAITOK); pmap_pinit(pmap); return pmap; } /* pmap_release INTERNAL ** * Release any resources held by the given pmap. * * This is the reverse analog to pmap_pinit. It does not * necessarily mean for the pmap structure to be deallocated, * as in pmap_destroy. */ static INLINE void pmap_release(pmap_t pmap) { /* * As long as the pmap contains no mappings, * which always should be the case whenever * this function is called, there really should * be nothing to do. */ #ifdef PMAP_DEBUG if (pmap == pmap_kernel()) panic("pmap_release: kernel pmap"); #endif /* * XXX - If this pmap has an A table, give it back. * The pmap SHOULD be empty by now, and pmap_remove * should have already given back the A table... * However, I see: pmap->pm_a_tmgr->at_ecnt == 1 * at this point, which means some mapping was not * removed when it should have been. -gwr */ if (pmap->pm_a_tmgr != NULL) { /* First make sure we are not using it! */ if (kernel_crp.rp_addr == pmap->pm_a_phys) { kernel_crp.rp_addr = kernAphys; loadcrp(&kernel_crp); } #ifdef PMAP_DEBUG /* XXX - todo! */ /* XXX - Now complain... */ printf("pmap_release: still have table\n"); Debugger(); #endif free_a_table(pmap->pm_a_tmgr, true); pmap->pm_a_tmgr = NULL; pmap->pm_a_phys = kernAphys; } } /* pmap_reference INTERFACE ** * Increment the reference count of a pmap. */ void pmap_reference(pmap_t pmap) { atomic_inc_uint(&pmap->pm_refcount); } /* pmap_dereference INTERNAL ** * Decrease the reference count on the given pmap * by one and return the current count. */ static INLINE int pmap_dereference(pmap_t pmap) { int rtn; rtn = atomic_dec_uint_nv(&pmap->pm_refcount); return rtn; } /* pmap_destroy INTERFACE ** * Decrement a pmap's reference count and delete * the pmap if it becomes zero. Will be called * only after all mappings have been removed. */ void pmap_destroy(pmap_t pmap) { if (pmap_dereference(pmap) == 0) { pmap_release(pmap); pool_put(&pmap_pmap_pool, pmap); } } /* pmap_is_referenced INTERFACE ** * Determine if the given physical page has been * referenced (read from [or written to.]) */ bool pmap_is_referenced(struct vm_page *pg) { paddr_t pa = VM_PAGE_TO_PHYS(pg); pv_t *pv; int idx; /* * Check the flags on the pv head. If they are set, * return immediately. Otherwise a search must be done. */ pv = pa2pv(pa); if (pv->pv_flags & PV_FLAGS_USED) return true; /* * Search through all pv elements pointing * to this page and query their reference bits */ for (idx = pv->pv_idx; idx != PVE_EOL; idx = pvebase[idx].pve_next) { if (MMU_PTE_USED(kernCbase[idx])) { return true; } } return false; } /* pmap_is_modified INTERFACE ** * Determine if the given physical page has been * modified (written to.) */ bool pmap_is_modified(struct vm_page *pg) { paddr_t pa = VM_PAGE_TO_PHYS(pg); pv_t *pv; int idx; /* see comments in pmap_is_referenced() */ pv = pa2pv(pa); if (pv->pv_flags & PV_FLAGS_MDFY) return true; for (idx = pv->pv_idx; idx != PVE_EOL; idx = pvebase[idx].pve_next) { if (MMU_PTE_MODIFIED(kernCbase[idx])) { return true; } } return false; } /* pmap_page_protect INTERFACE ** * Applies the given protection to all mappings to the given * physical page. */ void pmap_page_protect(struct vm_page *pg, vm_prot_t prot) { paddr_t pa = VM_PAGE_TO_PHYS(pg); pv_t *pv; int idx; vaddr_t va; struct mmu_short_pte_struct *pte; c_tmgr_t *c_tbl; pmap_t pmap, curpmap; curpmap = current_pmap(); pv = pa2pv(pa); for (idx = pv->pv_idx; idx != PVE_EOL; idx = pvebase[idx].pve_next) { pte = &kernCbase[idx]; switch (prot) { case VM_PROT_ALL: /* do nothing */ break; case VM_PROT_EXECUTE: case VM_PROT_READ: case VM_PROT_READ|VM_PROT_EXECUTE: /* * Determine the virtual address mapped by * the PTE and flush ATC entries if necessary. */ va = pmap_get_pteinfo(idx, &pmap, &c_tbl); pte->attr.raw |= MMU_SHORT_PTE_WP; if (pmap == curpmap || pmap == pmap_kernel()) TBIS(va); break; case VM_PROT_NONE: /* Save the mod/ref bits. */ pv->pv_flags |= pte->attr.raw; /* Invalidate the PTE. */ pte->attr.raw = MMU_DT_INVALID; /* * Update table counts. And flush ATC entries * if necessary. */ va = pmap_get_pteinfo(idx, &pmap, &c_tbl); /* * If the PTE belongs to the kernel map, * be sure to flush the page it maps. */ if (pmap == pmap_kernel()) { TBIS(va); } else { /* * The PTE belongs to a user map. * update the entry count in the C * table to which it belongs and flush * the ATC if the mapping belongs to * the current pmap. */ c_tbl->ct_ecnt--; if (pmap == curpmap) TBIS(va); } break; default: break; } } /* * If the protection code indicates that all mappings to the page * be removed, truncate the PV list to zero entries. */ if (prot == VM_PROT_NONE) pv->pv_idx = PVE_EOL; } /* pmap_get_pteinfo INTERNAL ** * Called internally to find the pmap and virtual address within that * map to which the pte at the given index maps. Also includes the PTE's C * table manager. * * Returns the pmap in the argument provided, and the virtual address * by return value. */ vaddr_t pmap_get_pteinfo(u_int idx, pmap_t *pmap, c_tmgr_t **tbl) { vaddr_t va = 0; /* * Determine if the PTE is a kernel PTE or a user PTE. */ if (idx >= NUM_KERN_PTES) { /* * The PTE belongs to a user mapping. */ /* XXX: Would like an inline for this to validate idx... */ *tbl = &Ctmgrbase[(idx - NUM_KERN_PTES) / MMU_C_TBL_SIZE]; *pmap = (*tbl)->ct_pmap; /* * To find the va to which the PTE maps, we first take * the table's base virtual address mapping which is stored * in ct_va. We then increment this address by a page for * every slot skipped until we reach the PTE. */ va = (*tbl)->ct_va; va += m68k_ptob(idx % MMU_C_TBL_SIZE); } else { /* * The PTE belongs to the kernel map. */ *pmap = pmap_kernel(); va = m68k_ptob(idx); va += KERNBASE3X; } return va; } /* pmap_clear_modify INTERFACE ** * Clear the modification bit on the page at the specified * physical address. * */ bool pmap_clear_modify(struct vm_page *pg) { paddr_t pa = VM_PAGE_TO_PHYS(pg); bool rv; rv = pmap_is_modified(pg); pmap_clear_pv(pa, PV_FLAGS_MDFY); return rv; } /* pmap_clear_reference INTERFACE ** * Clear the referenced bit on the page at the specified * physical address. */ bool pmap_clear_reference(struct vm_page *pg) { paddr_t pa = VM_PAGE_TO_PHYS(pg); bool rv; rv = pmap_is_referenced(pg); pmap_clear_pv(pa, PV_FLAGS_USED); return rv; } /* pmap_clear_pv INTERNAL ** * Clears the specified flag from the specified physical address. * (Used by pmap_clear_modify() and pmap_clear_reference().) * * Flag is one of: * PV_FLAGS_MDFY - Page modified bit. * PV_FLAGS_USED - Page used (referenced) bit. * * This routine must not only clear the flag on the pv list * head. It must also clear the bit on every pte in the pv * list associated with the address. */ void pmap_clear_pv(paddr_t pa, int flag) { pv_t *pv; int idx; vaddr_t va; pmap_t pmap; mmu_short_pte_t *pte; c_tmgr_t *c_tbl; pv = pa2pv(pa); pv->pv_flags &= ~(flag); for (idx = pv->pv_idx; idx != PVE_EOL; idx = pvebase[idx].pve_next) { pte = &kernCbase[idx]; pte->attr.raw &= ~(flag); /* * The MC68030 MMU will not set the modified or * referenced bits on any MMU tables for which it has * a cached descriptor with its modify bit set. To insure * that it will modify these bits on the PTE during the next * time it is written to or read from, we must flush it from * the ATC. * * Ordinarily it is only necessary to flush the descriptor * if it is used in the current address space. But since I * am not sure that there will always be a notion of * 'the current address space' when this function is called, * I will skip the test and always flush the address. It * does no harm. */ va = pmap_get_pteinfo(idx, &pmap, &c_tbl); TBIS(va); } } /* pmap_extract_kernel INTERNAL ** * Extract a translation from the kernel address space. */ static INLINE bool pmap_extract_kernel(vaddr_t va, paddr_t *pap) { mmu_short_pte_t *pte; pte = &kernCbase[(u_int)m68k_btop(va - KERNBASE3X)]; if (!MMU_VALID_DT(*pte)) return false; if (pap != NULL) *pap = MMU_PTE_PA(*pte); return true; } /* pmap_extract INTERFACE ** * Return the physical address mapped by the virtual address * in the specified pmap. * * Note: this function should also apply an exclusive lock * on the pmap system during its duration. */ bool pmap_extract(pmap_t pmap, vaddr_t va, paddr_t *pap) { int a_idx, b_idx, pte_idx; a_tmgr_t *a_tbl; b_tmgr_t *b_tbl; c_tmgr_t *c_tbl; mmu_short_pte_t *c_pte; if (pmap == pmap_kernel()) return pmap_extract_kernel(va, pap); if (pmap_stroll(pmap, va, &a_tbl, &b_tbl, &c_tbl, &c_pte, &a_idx, &b_idx, &pte_idx) == false) return false; if (!MMU_VALID_DT(*c_pte)) return false; if (pap != NULL) *pap = MMU_PTE_PA(*c_pte); return true; } /* pmap_remove_kernel INTERNAL ** * Remove the mapping of a range of virtual addresses from the kernel map. * The arguments are already page-aligned. */ static INLINE void pmap_remove_kernel(vaddr_t sva, vaddr_t eva) { int idx, eidx; #ifdef PMAP_DEBUG if ((sva & PGOFSET) || (eva & PGOFSET)) panic("pmap_remove_kernel: alignment"); #endif idx = m68k_btop(sva - KERNBASE3X); eidx = m68k_btop(eva - KERNBASE3X); while (idx < eidx) { pmap_remove_pte(&kernCbase[idx++]); TBIS(sva); sva += PAGE_SIZE; } } /* pmap_remove INTERFACE ** * Remove the mapping of a range of virtual addresses from the given pmap. * */ void pmap_remove(pmap_t pmap, vaddr_t sva, vaddr_t eva) { if (pmap == pmap_kernel()) { pmap_remove_kernel(sva, eva); return; } /* * If the pmap doesn't have an A table of its own, it has no mappings * that can be removed. */ if (pmap->pm_a_tmgr == NULL) return; /* * Remove the specified range from the pmap. If the function * returns true, the operation removed all the valid mappings * in the pmap and freed its A table. If this happened to the * currently loaded pmap, the MMU root pointer must be reloaded * with the default 'kernel' map. */ if (pmap_remove_a(pmap->pm_a_tmgr, sva, eva)) { if (kernel_crp.rp_addr == pmap->pm_a_phys) { kernel_crp.rp_addr = kernAphys; loadcrp(&kernel_crp); /* will do TLB flush below */ } pmap->pm_a_tmgr = NULL; pmap->pm_a_phys = kernAphys; } /* * If we just modified the current address space, * make sure to flush the MMU cache. * * XXX - this could be an unecessarily large flush. * XXX - Could decide, based on the size of the VA range * to be removed, whether to flush "by pages" or "all". */ if (pmap == current_pmap()) TBIAU(); } /* pmap_remove_a INTERNAL ** * This is function number one in a set of three that removes a range * of memory in the most efficient manner by removing the highest possible * tables from the memory space. This particular function attempts to remove * as many B tables as it can, delegating the remaining fragmented ranges to * pmap_remove_b(). * * If the removal operation results in an empty A table, the function returns * true. * * It's ugly but will do for now. */ bool pmap_remove_a(a_tmgr_t *a_tbl, vaddr_t sva, vaddr_t eva) { bool empty; int idx; vaddr_t nstart, nend; b_tmgr_t *b_tbl; mmu_long_dte_t *a_dte; mmu_short_dte_t *b_dte; uint8_t at_wired, bt_wired; /* * The following code works with what I call a 'granularity * reduction algorithim'. A range of addresses will always have * the following properties, which are classified according to * how the range relates to the size of the current granularity * - an A table entry: * * 1 2 3 4 * -+---+---+---+---+---+---+---+- * -+---+---+---+---+---+---+---+- * * A range will always start on a granularity boundary, illustrated * by '+' signs in the table above, or it will start at some point * inbetween a granularity boundary, as illustrated by point 1. * The first step in removing a range of addresses is to remove the * range between 1 and 2, the nearest granularity boundary. This * job is handled by the section of code governed by the * 'if (start < nstart)' statement. * * A range will always encompass zero or more intergral granules, * illustrated by points 2 and 3. Integral granules are easy to * remove. The removal of these granules is the second step, and * is handled by the code block 'if (nstart < nend)'. * * Lastly, a range will always end on a granularity boundary, * ill. by point 3, or it will fall just beyond one, ill. by point * 4. The last step involves removing this range and is handled by * the code block 'if (nend < end)'. */ nstart = MMU_ROUND_UP_A(sva); nend = MMU_ROUND_A(eva); at_wired = a_tbl->at_wcnt; if (sva < nstart) { /* * This block is executed if the range starts between * a granularity boundary. * * First find the DTE which is responsible for mapping * the start of the range. */ idx = MMU_TIA(sva); a_dte = &a_tbl->at_dtbl[idx]; /* * If the DTE is valid then delegate the removal of the sub * range to pmap_remove_b(), which can remove addresses at * a finer granularity. */ if (MMU_VALID_DT(*a_dte)) { b_dte = mmu_ptov(a_dte->addr.raw); b_tbl = mmuB2tmgr(b_dte); bt_wired = b_tbl->bt_wcnt; /* * The sub range to be removed starts at the start * of the full range we were asked to remove, and ends * at the greater of: * 1. The end of the full range, -or- * 2. The end of the full range, rounded down to the * nearest granularity boundary. */ if (eva < nstart) empty = pmap_remove_b(b_tbl, sva, eva); else empty = pmap_remove_b(b_tbl, sva, nstart); /* * If the child table no longer has wired entries, * decrement wired entry count. */ if (bt_wired && b_tbl->bt_wcnt == 0) a_tbl->at_wcnt--; /* * If the removal resulted in an empty B table, * invalidate the DTE that points to it and decrement * the valid entry count of the A table. */ if (empty) { a_dte->attr.raw = MMU_DT_INVALID; a_tbl->at_ecnt--; } } /* * If the DTE is invalid, the address range is already non- * existent and can simply be skipped. */ } if (nstart < nend) { /* * This block is executed if the range spans a whole number * multiple of granules (A table entries.) * * First find the DTE which is responsible for mapping * the start of the first granule involved. */ idx = MMU_TIA(nstart); a_dte = &a_tbl->at_dtbl[idx]; /* * Remove entire sub-granules (B tables) one at a time, * until reaching the end of the range. */ for (; nstart < nend; a_dte++, nstart += MMU_TIA_RANGE) if (MMU_VALID_DT(*a_dte)) { /* * Find the B table manager for the * entry and free it. */ b_dte = mmu_ptov(a_dte->addr.raw); b_tbl = mmuB2tmgr(b_dte); bt_wired = b_tbl->bt_wcnt; free_b_table(b_tbl, true); /* * All child entries has been removed. * If there were any wired entries in it, * decrement wired entry count. */ if (bt_wired) a_tbl->at_wcnt--; /* * Invalidate the DTE that points to the * B table and decrement the valid entry * count of the A table. */ a_dte->attr.raw = MMU_DT_INVALID; a_tbl->at_ecnt--; } } if (nend < eva) { /* * This block is executed if the range ends beyond a * granularity boundary. * * First find the DTE which is responsible for mapping * the start of the nearest (rounded down) granularity * boundary. */ idx = MMU_TIA(nend); a_dte = &a_tbl->at_dtbl[idx]; /* * If the DTE is valid then delegate the removal of the sub * range to pmap_remove_b(), which can remove addresses at * a finer granularity. */ if (MMU_VALID_DT(*a_dte)) { /* * Find the B table manager for the entry * and hand it to pmap_remove_b() along with * the sub range. */ b_dte = mmu_ptov(a_dte->addr.raw); b_tbl = mmuB2tmgr(b_dte); bt_wired = b_tbl->bt_wcnt; empty = pmap_remove_b(b_tbl, nend, eva); /* * If the child table no longer has wired entries, * decrement wired entry count. */ if (bt_wired && b_tbl->bt_wcnt == 0) a_tbl->at_wcnt--; /* * If the removal resulted in an empty B table, * invalidate the DTE that points to it and decrement * the valid entry count of the A table. */ if (empty) { a_dte->attr.raw = MMU_DT_INVALID; a_tbl->at_ecnt--; } } } /* * If there are no more entries in the A table, release it * back to the available pool and return true. */ if (a_tbl->at_ecnt == 0) { KASSERT(a_tbl->at_wcnt == 0); a_tbl->at_parent = NULL; if (!at_wired) TAILQ_REMOVE(&a_pool, a_tbl, at_link); TAILQ_INSERT_HEAD(&a_pool, a_tbl, at_link); empty = true; } else { /* * If the table doesn't have wired entries any longer * but still has unwired entries, put it back into * the available queue. */ if (at_wired && a_tbl->at_wcnt == 0) TAILQ_INSERT_TAIL(&a_pool, a_tbl, at_link); empty = false; } return empty; } /* pmap_remove_b INTERNAL ** * Remove a range of addresses from an address space, trying to remove entire * C tables if possible. * * If the operation results in an empty B table, the function returns true. */ bool pmap_remove_b(b_tmgr_t *b_tbl, vaddr_t sva, vaddr_t eva) { bool empty; int idx; vaddr_t nstart, nend, rstart; c_tmgr_t *c_tbl; mmu_short_dte_t *b_dte; mmu_short_pte_t *c_dte; uint8_t bt_wired, ct_wired; nstart = MMU_ROUND_UP_B(sva); nend = MMU_ROUND_B(eva); bt_wired = b_tbl->bt_wcnt; if (sva < nstart) { idx = MMU_TIB(sva); b_dte = &b_tbl->bt_dtbl[idx]; if (MMU_VALID_DT(*b_dte)) { c_dte = mmu_ptov(MMU_DTE_PA(*b_dte)); c_tbl = mmuC2tmgr(c_dte); ct_wired = c_tbl->ct_wcnt; if (eva < nstart) empty = pmap_remove_c(c_tbl, sva, eva); else empty = pmap_remove_c(c_tbl, sva, nstart); /* * If the child table no longer has wired entries, * decrement wired entry count. */ if (ct_wired && c_tbl->ct_wcnt == 0) b_tbl->bt_wcnt--; if (empty) { b_dte->attr.raw = MMU_DT_INVALID; b_tbl->bt_ecnt--; } } } if (nstart < nend) { idx = MMU_TIB(nstart); b_dte = &b_tbl->bt_dtbl[idx]; rstart = nstart; while (rstart < nend) { if (MMU_VALID_DT(*b_dte)) { c_dte = mmu_ptov(MMU_DTE_PA(*b_dte)); c_tbl = mmuC2tmgr(c_dte); ct_wired = c_tbl->ct_wcnt; free_c_table(c_tbl, true); /* * All child entries has been removed. * If there were any wired entries in it, * decrement wired entry count. */ if (ct_wired) b_tbl->bt_wcnt--; b_dte->attr.raw = MMU_DT_INVALID; b_tbl->bt_ecnt--; } b_dte++; rstart += MMU_TIB_RANGE; } } if (nend < eva) { idx = MMU_TIB(nend); b_dte = &b_tbl->bt_dtbl[idx]; if (MMU_VALID_DT(*b_dte)) { c_dte = mmu_ptov(MMU_DTE_PA(*b_dte)); c_tbl = mmuC2tmgr(c_dte); ct_wired = c_tbl->ct_wcnt; empty = pmap_remove_c(c_tbl, nend, eva); /* * If the child table no longer has wired entries, * decrement wired entry count. */ if (ct_wired && c_tbl->ct_wcnt == 0) b_tbl->bt_wcnt--; if (empty) { b_dte->attr.raw = MMU_DT_INVALID; b_tbl->bt_ecnt--; } } } if (b_tbl->bt_ecnt == 0) { KASSERT(b_tbl->bt_wcnt == 0); b_tbl->bt_parent = NULL; if (!bt_wired) TAILQ_REMOVE(&b_pool, b_tbl, bt_link); TAILQ_INSERT_HEAD(&b_pool, b_tbl, bt_link); empty = true; } else { /* * If the table doesn't have wired entries any longer * but still has unwired entries, put it back into * the available queue. */ if (bt_wired && b_tbl->bt_wcnt == 0) TAILQ_INSERT_TAIL(&b_pool, b_tbl, bt_link); empty = false; } return empty; } /* pmap_remove_c INTERNAL ** * Remove a range of addresses from the given C table. */ bool pmap_remove_c(c_tmgr_t *c_tbl, vaddr_t sva, vaddr_t eva) { bool empty; int idx; mmu_short_pte_t *c_pte; uint8_t ct_wired; ct_wired = c_tbl->ct_wcnt; idx = MMU_TIC(sva); c_pte = &c_tbl->ct_dtbl[idx]; for (; sva < eva; sva += MMU_PAGE_SIZE, c_pte++) { if (MMU_VALID_DT(*c_pte)) { if (c_pte->attr.raw & MMU_SHORT_PTE_WIRED) c_tbl->ct_wcnt--; pmap_remove_pte(c_pte); c_tbl->ct_ecnt--; } } if (c_tbl->ct_ecnt == 0) { KASSERT(c_tbl->ct_wcnt == 0); c_tbl->ct_parent = NULL; if (!ct_wired) TAILQ_REMOVE(&c_pool, c_tbl, ct_link); TAILQ_INSERT_HEAD(&c_pool, c_tbl, ct_link); empty = true; } else { /* * If the table doesn't have wired entries any longer * but still has unwired entries, put it back into * the available queue. */ if (ct_wired && c_tbl->ct_wcnt == 0) TAILQ_INSERT_TAIL(&c_pool, c_tbl, ct_link); empty = false; } return empty; } /* pmap_bootstrap_alloc INTERNAL ** * Used internally for memory allocation at startup when malloc is not * available. This code will fail once it crosses the first memory * bank boundary on the 3/80. Hopefully by then however, the VM system * will be in charge of allocation. */ void * pmap_bootstrap_alloc(int size) { void *rtn; #ifdef PMAP_DEBUG if (bootstrap_alloc_enabled == false) { mon_printf("pmap_bootstrap_alloc: disabled\n"); sunmon_abort(); } #endif rtn = (void *) virtual_avail; virtual_avail += size; #ifdef PMAP_DEBUG if (virtual_avail > virtual_contig_end) { mon_printf("pmap_bootstrap_alloc: out of mem\n"); sunmon_abort(); } #endif return rtn; } /* pmap_bootstap_aalign INTERNAL ** * Used to insure that the next call to pmap_bootstrap_alloc() will * return a chunk of memory aligned to the specified size. * * Note: This function will only support alignment sizes that are powers * of two. */ void pmap_bootstrap_aalign(int size) { int off; off = virtual_avail & (size - 1); if (off) { (void)pmap_bootstrap_alloc(size - off); } } /* pmap_pa_exists ** * Used by the /dev/mem driver to see if a given PA is memory * that can be mapped. (The PA is not in a hole.) */ int pmap_pa_exists(paddr_t pa) { int i; for (i = 0; i < SUN3X_NPHYS_RAM_SEGS; i++) { if ((pa >= avail_mem[i].pmem_start) && (pa < avail_mem[i].pmem_end)) return 1; if (avail_mem[i].pmem_next == NULL) break; } return 0; } /* Called only from locore.s and pmap.c */ void _pmap_switch(pmap_t pmap); /* * _pmap_switch INTERNAL * * This is called by locore.s:cpu_switch() when it is * switching to a new process. Load new translations. * Note: done in-line by locore.s unless PMAP_DEBUG * * Note that we do NOT allocate a context here, but * share the "kernel only" context until we really * need our own context for user-space mappings in * pmap_enter_user(). [ s/context/mmu A table/ ] */ void _pmap_switch(pmap_t pmap) { u_long rootpa; /* * Only do reload/flush if we have to. * Note that if the old and new process * were BOTH using the "null" context, * then this will NOT flush the TLB. */ rootpa = pmap->pm_a_phys; if (kernel_crp.rp_addr != rootpa) { DPRINT(("pmap_activate(%p)\n", pmap)); kernel_crp.rp_addr = rootpa; loadcrp(&kernel_crp); TBIAU(); } } /* * Exported version of pmap_activate(). This is called from the * machine-independent VM code when a process is given a new pmap. * If (p == curlwp) do like cpu_switch would do; otherwise just * take this as notification that the process has a new pmap. */ void pmap_activate(struct lwp *l) { if (l->l_proc == curproc) { _pmap_switch(l->l_proc->p_vmspace->vm_map.pmap); } } /* * pmap_deactivate INTERFACE ** * This is called to deactivate the specified process's address space. */ void pmap_deactivate(struct lwp *l) { /* Nothing to do. */ } /* * Fill in the sun3x-specific part of the kernel core header * for dumpsys(). (See machdep.c for the rest.) */ void pmap_kcore_hdr(struct sun3x_kcore_hdr *sh) { u_long spa, len; int i; sh->pg_frame = MMU_SHORT_PTE_BASEADDR; sh->pg_valid = MMU_DT_PAGE; sh->contig_end = virtual_contig_end; sh->kernCbase = (u_long)kernCbase; for (i = 0; i < SUN3X_NPHYS_RAM_SEGS; i++) { spa = avail_mem[i].pmem_start; spa = m68k_trunc_page(spa); len = avail_mem[i].pmem_end - spa; len = m68k_round_page(len); sh->ram_segs[i].start = spa; sh->ram_segs[i].size = len; } } /* pmap_virtual_space INTERFACE ** * Return the current available range of virtual addresses in the * arguuments provided. Only really called once. */ void pmap_virtual_space(vaddr_t *vstart, vaddr_t *vend) { *vstart = virtual_avail; *vend = virtual_end; } /* * Provide memory to the VM system. * * Assume avail_start is always in the * first segment as pmap_bootstrap does. */ static void pmap_page_upload(void) { paddr_t a, b; /* memory range */ int i; /* Supply the memory in segments. */ for (i = 0; i < SUN3X_NPHYS_RAM_SEGS; i++) { a = atop(avail_mem[i].pmem_start); b = atop(avail_mem[i].pmem_end); if (i == 0) a = atop(avail_start); if (avail_mem[i].pmem_end > avail_end) b = atop(avail_end); uvm_page_physload(a, b, a, b, VM_FREELIST_DEFAULT); if (avail_mem[i].pmem_next == NULL) break; } } /* pmap_count INTERFACE ** * Return the number of resident (valid) pages in the given pmap. * * Note: If this function is handed the kernel map, it will report * that it has no mappings. Hopefully the VM system won't ask for kernel * map statistics. */ segsz_t pmap_count(pmap_t pmap, int type) { u_int count; int a_idx, b_idx; a_tmgr_t *a_tbl; b_tmgr_t *b_tbl; c_tmgr_t *c_tbl; /* * If the pmap does not have its own A table manager, it has no * valid entires. */ if (pmap->pm_a_tmgr == NULL) return 0; a_tbl = pmap->pm_a_tmgr; count = 0; for (a_idx = 0; a_idx < MMU_TIA(KERNBASE3X); a_idx++) { if (MMU_VALID_DT(a_tbl->at_dtbl[a_idx])) { b_tbl = mmuB2tmgr(mmu_ptov(a_tbl->at_dtbl[a_idx].addr.raw)); for (b_idx = 0; b_idx < MMU_B_TBL_SIZE; b_idx++) { if (MMU_VALID_DT(b_tbl->bt_dtbl[b_idx])) { c_tbl = mmuC2tmgr( mmu_ptov(MMU_DTE_PA(b_tbl->bt_dtbl[b_idx]))); if (type == 0) /* * A resident entry count has been requested. */ count += c_tbl->ct_ecnt; else /* * A wired entry count has been requested. */ count += c_tbl->ct_wcnt; } } } } return count; } /************************ SUN3 COMPATIBILITY ROUTINES ******************** * The following routines are only used by DDB for tricky kernel text * * text operations in db_memrw.c. They are provided for sun3 * * compatibility. * *************************************************************************/ /* get_pte INTERNAL ** * Return the page descriptor the describes the kernel mapping * of the given virtual address. */ extern u_long ptest_addr(u_long); /* XXX: locore.s */ u_int get_pte(vaddr_t va) { u_long pte_pa; mmu_short_pte_t *pte; /* Get the physical address of the PTE */ pte_pa = ptest_addr(va & ~PGOFSET); /* Convert to a virtual address... */ pte = (mmu_short_pte_t *) (KERNBASE3X + pte_pa); /* Make sure it is in our level-C tables... */ if ((pte < kernCbase) || (pte >= &mmuCbase[NUM_USER_PTES])) return 0; /* ... and just return its contents. */ return (pte->attr.raw); } /* set_pte INTERNAL ** * Set the page descriptor that describes the kernel mapping * of the given virtual address. */ void set_pte(vaddr_t va, u_int pte) { u_long idx; if (va < KERNBASE3X) return; idx = (unsigned long) m68k_btop(va - KERNBASE3X); kernCbase[idx].attr.raw = pte; TBIS(va); } /* * Routine: pmap_procwr * * Function: * Synchronize caches corresponding to [addr, addr+len) in p. */ void pmap_procwr(struct proc *p, vaddr_t va, size_t len) { (void)cachectl1(0x80000004, va, len, p); } #ifdef PMAP_DEBUG /************************** DEBUGGING ROUTINES ************************** * The following routines are meant to be an aid to debugging the pmap * * system. They are callable from the DDB command line and should be * * prepared to be handed unstable or incomplete states of the system. * ************************************************************************/ /* pv_list ** * List all pages found on the pv list for the given physical page. * To avoid endless loops, the listing will stop at the end of the list * or after 'n' entries - whichever comes first. */ void pv_list(paddr_t pa, int n) { int idx; vaddr_t va; pv_t *pv; c_tmgr_t *c_tbl; pmap_t pmap; pv = pa2pv(pa); idx = pv->pv_idx; for (; idx != PVE_EOL && n > 0; idx = pvebase[idx].pve_next, n--) { va = pmap_get_pteinfo(idx, &pmap, &c_tbl); printf("idx %d, pmap 0x%x, va 0x%x, c_tbl %x\n", idx, (u_int) pmap, (u_int) va, (u_int) c_tbl); } } #endif /* PMAP_DEBUG */ #ifdef NOT_YET /* and maybe not ever */ /************************** LOW-LEVEL ROUTINES ************************** * These routines will eventually be re-written into assembly and placed* * in locore.s. They are here now as stubs so that the pmap module can * * be linked as a standalone user program for testing. * ************************************************************************/ /* flush_atc_crp INTERNAL ** * Flush all page descriptors derived from the given CPU Root Pointer * (CRP), or 'A' table as it is known here, from the 68851's automatic * cache. */ void flush_atc_crp(int a_tbl) { mmu_long_rp_t rp; /* Create a temporary root table pointer that points to the * given A table. */ rp.attr.raw = ~MMU_LONG_RP_LU; rp.addr.raw = (unsigned int) a_tbl; mmu_pflushr(&rp); /* mmu_pflushr: * movel sp(4)@,a0 * pflushr a0@ * rts */ } #endif /* NOT_YET */