emulators/dynamips - The NetBSD Packages Collection

Cisco 3600 and 7200 MIPS emulator

Cisco 3600 and Cisco 7200 emulator. You'll need an
IOS image in order to properly use this package.

At this time, the emulator is able to boot a large
number of Cisco IOS releases available for the 7200
and 3600 platforms, including the latest 12.2S and 12.4T.

The following devices are emulated in the current release (0.2.5):

- MIPS64 CPU processor. The instruction set is not completely
  emulated now (FPU support is lacking, TLB support is not
  finished and other minor things), but it is sufficient for IOS ;
- DRAM and Packet SRAM memory ;
- Non-Volatile Memory (NVRAM) ;
- Signetics SCN 2681 DUART (C7200 Console and AUX ports) ;
- National Semiconductors NS16552 DUART (C3600 Console and AUX ports) ;
- Dallas DS1620 Temperature Sensors and Voltage Sensors, allowing
  the C7200 Environmental Monitor to work properly ;
- NMC93C46 Serial EEPROM ;
- Bootflash of 8 Mb (Intel 28F016SA) ;
- Galileo GT64010/GT64120 PCI controller, DEC 21x50 PCI bridges and so ;
- PCMCIA ATA disk emulation (C7200 only at this time).

Build dependencies

pkgtools/mktools devel/cmake devel/gmake pkgtools/cwrappers

Runtime dependencies

devel/libelf devel/libuuid

Binary packages

OSArchitectureVersion
NetBSD 10.0aarch64dynamips-0.2.17.tgz
NetBSD 10.0aarch64dynamips-0.2.17.tgz
NetBSD 10.0aarch64dynamips-0.2.17.tgz
NetBSD 10.0aarch64ebdynamips-0.2.17.tgz
NetBSD 10.0aarch64ebdynamips-0.2.17.tgz
NetBSD 10.0alphadynamips-0.2.17.tgz
NetBSD 10.0alphadynamips-0.2.17.tgz
NetBSD 10.0earmv6hfdynamips-0.2.17.tgz
NetBSD 10.0earmv6hfdynamips-0.2.17.tgz
NetBSD 10.0earmv6hfdynamips-0.2.17.tgz
NetBSD 10.0earmv7hfdynamips-0.2.17.tgz
NetBSD 10.0earmv7hfdynamips-0.2.17.tgz
NetBSD 10.0earmv7hfdynamips-0.2.17.tgz
NetBSD 10.0i386dynamips-0.2.17.tgz
NetBSD 10.0i386dynamips-0.2.17.tgz
NetBSD 10.0i386dynamips-0.2.17.tgz
NetBSD 10.0i386dynamips-0.2.17.tgz
NetBSD 10.0powerpcdynamips-0.2.17.tgz
NetBSD 10.0powerpcdynamips-0.2.17.tgz
NetBSD 10.0powerpcdynamips-0.2.17.tgz
NetBSD 10.0sparc64dynamips-0.2.17.tgz
NetBSD 10.0sparc64dynamips-0.2.17.tgz
NetBSD 10.0sparcdynamips-0.2.17.tgz
NetBSD 10.0sparcdynamips-0.2.17.tgz
NetBSD 10.0x86_64dynamips-0.2.17.tgz
NetBSD 10.0x86_64dynamips-0.2.17.tgz
NetBSD 10.0x86_64dynamips-0.2.17.tgz
NetBSD 10.0x86_64dynamips-0.2.17.tgz
NetBSD 9.0aarch64dynamips-0.2.17.tgz
NetBSD 9.0aarch64dynamips-0.2.17.tgz
NetBSD 9.0aarch64dynamips-0.2.17.tgz
NetBSD 9.0alphadynamips-0.2.17.tgz
NetBSD 9.0alphadynamips-0.2.17.tgz
NetBSD 9.0earmv6hfdynamips-0.2.17.tgz
NetBSD 9.0earmv6hfdynamips-0.2.17.tgz
NetBSD 9.0earmv7hfdynamips-0.2.17.tgz
NetBSD 9.0earmv7hfdynamips-0.2.17.tgz
NetBSD 9.0i386dynamips-0.2.17.tgz
NetBSD 9.0i386dynamips-0.2.17.tgz
NetBSD 9.0i386dynamips-0.2.17.tgz
NetBSD 9.0i386dynamips-0.2.17.tgz
NetBSD 9.0powerpcdynamips-0.2.17.tgz
NetBSD 9.0powerpcdynamips-0.2.17.tgz
NetBSD 9.0powerpcdynamips-0.2.17.tgz
NetBSD 9.0sparc64dynamips-0.2.17.tgz
NetBSD 9.0x86_64dynamips-0.2.17.tgz
NetBSD 9.0x86_64dynamips-0.2.17.tgz
NetBSD 9.0x86_64dynamips-0.2.17.tgz
NetBSD 9.0x86_64dynamips-0.2.17.tgz
NetBSD 9.3x86_64dynamips-0.2.17.tgz
NetBSD 9.3x86_64dynamips-0.2.17.tgz

Binary packages can be installed with the high-level tool pkgin (which can be installed with pkg_add) or pkg_add(1) (installed by default). The NetBSD packages collection is also designed to permit easy installation from source.

Available build options

(none)

Known vulnerabilities

The pkg_admin audit command locates any installed package which has been mentioned in security advisories as having vulnerabilities.

Please note the vulnerabilities database might not be fully accurate, and not every bug is exploitable with every configuration.


Problem reports, updates or suggestions for this package should be reported with send-pr.