# status of various device drivers on a B180L+

# disk controllers

ahc	works if we avoid PCI IO space
esiop	works
isp	works

adw	passes autoconf, not tested
bha	passes autoconf, not tested (for some chips, firmware doesn't start)
	BT-948 is good
twe	passes autoconf, not tested (ATA)
hptide	passes autoconf, not tested (ATA)
pcscp	passes autoconf, not tested

aac	"aac0: FATAL: selftest failed" (just like on x86)
ahd	hangs during autoconf
adv	"adv_init: failed to find signature"
amr	hangs during autoconf
cac	"cac0: can't map i/o or memory space"
	"cac0: CAC_CMD_GET_CTRL_INFO failed"
dpt	"dpt0: EATA signature mismatch"
iha	hangs during autoconf (just like on x86)
mpt	"mpt0: mpt_recv_handshake_cmd timeout3"
trm	hangs during autoconf

icp	firmware doesn't start
iop	firmware doesn't start
mlx	firmware doesn't start
mly	firmware doesn't start




# network interfaces

epic	works - REALLY bad performance
fxp	works
ne	works
pcn	works - bad performance
rtk0	works
sip	works
tlp	works

sk	passes autoconf, not tested (fibre)

bge	"panic: mbus_dmamap_sync: bad length"
	can xmit but not recv
	macppc fails the same way - driver is probably broken for big-endian
ex	hangs during autoconf
fpa	"fpa0: initialization failed"
gsip	passes autoconf, ping ok, ttcp causes weird problems
re	"You may have a defective 32-bit NIC plugged into a 64-bit PCI slot."
sf	xmit ok, recv mangles packets
stge	passes autoconf, "stge0: device timeout" "stge0: DMA wait timed out"
ti	"ti0: unsupported chip revision 0x30000000" -- card works on x86
tl	hangs during autoconf
wm	passes autoconf, ping ok, ttcp has lots of input errors

hme	firmware starts but cannot load boot image
txp	firmware doesn't start
vge	firmware doesn't start





# USB

nec	firmware doesn't start
via	works
ali	works

umass	works
url	works
axe	no xmit, no recv
kue	"panic: unaligned data ref trap"