.Dd January 28, 2000 .Dt MG 1 .Os .Sh NAME .Nm mg .Nd an emacs clone (formerly named MicroGnuEmacs) .Sh SYNOPSIS .Nm .Op Ar file ... .Sh DESCRIPTION MG is a small, fast, and portable Emacs-style text editor intended to be used by people who can't run a real Emacs for one reason or another. .Pp We've made MG compatible with GNU Emacs because that is the big, full-featured editor that many use regularly and are most familiar with. .Pp MG runs on many different kinds of hardware under many different operating systems. .Sh Notation and Conventions To type a control character, use the control key on your keyboard like a shift key: hold down the control key while typing the character. We will indicate control characters as: C-x ie, type the character x while holding down the control key. .Pp Some keyboards also have a meta key that works like the control key. You can also use the escape key as a meta prefix; first type the escape, and then the character. Meta characters will be indicated as M-x. .Pp Besides the meta prefix, two other characters are used as prefixes: C-x and C-h. A few keys have special notation: SPC is the space character, DEL is the delete or rubout character, RET is carriage return, and ESC is the escape character. NUL is the null character (ASCII 0), which is usually equivalent to either C-SPC or C-@. .Pp Uppercase and lowercase characters are generally equivalent in command keystrokes. .Pp When you run MG from a shell, command line arguments are interpreted as the names of files you want to visit, or edit. Each file is read into a buffer in memory. No changes are actually made to the file until you ask it to be written out to disk. .Pp Within MG, the large top part of the screen serves as a window into the buffer being edited. Below this is the mode line, which displays the name of the buffer. Finally, at the very bottom of the screen, there is a one-line minibuffer which is used for displaying messages and answering questions. .Pp MG keeps track of two pointers into each window, the point and the mark. The cursor appears at the point in the current window, and we often speak of moving the cursor rather than of moving the point. The text between the point and the mark is referred to as the region. .Pp Some commands deal with words and paragraphs. Generally, whitespace and punctuation separate words. Lines that are empty or that contain only spaces or tabs separate paragraphs without being part of a paragraph. A non-empty line that starts with a space or tab also begins a new paragraph. .Pp A number of commands are defined as toggles. If no prefix argument is supplied, these commands toggle an action. The action is turned on if a negative or zero argument is supplied, and turned on if a positive argument is supplied. .Sh Frequently used commands .Pp C-p move the cursor to the previous line .Pp C-n move the cursor to the next line .Pp C-b move the cursor backwards .Pp C-f move the cursor forwards .Pp C-v scroll forwards one screenful .Pp M-v scroll backwards one screenful .Pp M-< go to the beginning of the buffer .Pp M-> go to the end of the buffer .Pp C-a go to the beginning of the line .Pp C-e go to the end of the line .Pp DEL delete the previous character .Pp C-k kill (delete) to the end of line .Pp C-y reinsert killed text. .Pp C-x C-c exit MG .Pp C-x C-s save the current buffer .Sh Command Arguments MG prompts for command arguments in the minibuffer. Within the minibuffer, the following characters can be used for editing: .Pp DEL or C-h erase the last character. .Pp C-x or C-u erase the entire input line. .Pp C-w erase to the beginning of the previous word. .Pp C-q or \\ quote the next character typed. .Pp RET signifies that you have completed typing in the argument. .Pp C-g abort the command in progress. .Sh Prefix Arguments All commands accept an optional numeric prefix argument. This is often interpreted as a repetition count. For example, the function next-line, if given a prefix argument, will move the cursor forward that many lines; without an argument, it will move the cursor forward one line. A few commands behave differently if given a prefix argument than they do without one, and others ignore the prefix argument entirely. .Bl -tag -width indent .It digit-argument, M-# & negative-argument, M-- One way to specify a command argument is to use the escape key as a meta prefix, and then type one or more digits. A dash may be used for a negative argument (# = 0,1,2,3,4,5,6,7,8,9). .It universal-argument, C-u Another way to specify a command prefix is to type C-u. Typing one C-u is equivalent to a prefix argument of 4, typing two gives a value of 16, and so on. In addition, you can type digits following C-u to form a numeric prefix argument. .El .Sh Aborting .Bl -tag -width indent .It keyboard-quit, C-g Typing C-g cancels any command. It is particularly useful for cancelling a command when MG is prompting for input in the minibuffer. .El .Sh Extended commands .Bl -tag -width indent .It execute-extended-command, M-x Commands that are not bound to keys can be executed through execute-extended-command. If a prefix argument is supplied, it is passed to the command being executed. .El .Sh Moving the cursor .Bl -tag -width indent .It backward-char, C-b Moves the cursor backward (left) one character. If the cursor is at the left margin, it will be moved to the end of the previous line. .It backward-paragraph, M-[ Moves the cursor backwards to the beginning of the current paragraph, or to the beginning of the previous paragraph if the cursor is already at the beginning of a paragraph. .It backward-word, M-b Moves the cursor backwards to the beginning of the current word, or to the beginning of the previous word if the cursor is already at the beginning of a word. .It beginning-of-buffer, M-< Moves the cursor backwards to the beginning of the buffer. .It beginning-of-line, C-a Moves the cursor backwards to the beginning of the current line. This command has no effect if the cursor is already at the beginning of the line. .It end-of-buffer, M-> Moves the cursor forwards to the end of the buffer. .It end-of-line, C-e Moves the cursor forwards to the end of the current line. This command has no effect if the cursor is already at the end of the line. .It exchange-point-and-mark, C-x C-x Set the mark at the current cursor position, and move the cursor to the old location of the mark. .It forward-char, C-f Moves the cursor forwards one character. If the cursor is at the end of a line, it will be moved to the first character on the next line. .It forward-paragraph, M-] Moves the cursor forwards to the next paragraph delimiter. .It forward-word, M-f Moves the cursor forwards to the end of the current word, or to the end of the next word if the cursor is already at the end of a word. .It goto-line Moves the cursor to the beginning of line the line number in the buffer. .It next-line, C-n Moves the cursor down one line. The cursor remains in the same column unless it would be past the end of the line, in which case it is moved to the end of the line. At the end of the buffer, C-n will create new lines. .It previous-line, C-p Moves the cursor up one line. The cursor remains in the same column unless it would be past the end of the line, in which case it is moved to the end of the line. .It recenter, C-l Redraws the entire screen, scrolling the current window if necessary so that the cursor is near the center. With a positive prefix argument n, the window is scrolled so that the cursor is n lines from the top. A negative prefix argument puts the cursor that many lines from the bottom of the window. .It redraw-display Redraws the entire screen, but never scrolls. .It scroll-down, M-v Scrolls the display down (moving backward through the buffer). Without an argument, it scrolls slightly less than one windowful. A prefix argument scrolls that many lines. .It scroll-one-line-down & scroll-one-line-up These functions are similar to scroll-down and scroll-up, but when invoked without an argument, cause the display to scroll by one line only. These functions are enabled by defining the compile-time option GOSMACS. .It scroll-other-window, M-C-v Scrolls the other window forward as for scroll-up. .It scroll-up, C-v Scrolls the display up (moving forward through the buffer). Without an an argument, it scrolls slightly less than one windowful. A prefix argument scrolls that many lines. .It set-mark-command Set the mark at the current cursor position. .It what-cursor-position, C-x = Prints some information in the minibuffer about where the cursor is. .El .Sh Text Insertion Commands The usual way to insert text into a buffer is simply to type the characters. The default binding for all of the printing characters self-insert-command causes them to be inserted literally at the cursor position. .Bl -tag -width indent .It insert Insert typed string into the current buffer at the cursor position. .It newline, RET Insert a line break into the current buffer at the cursor position, moving the cursor forward to the beginning of the new line. .It newline-and-indent, C-j Insert a line break into the current buffer at the cursor position, then add extra whitespace so that the cursor is aligned in the same column as the first non-whitespace character in the previous line. .It open-line, C-o Inserts a line break into the current buffer at the current position, but does not move the cursor forward. .It quoted-insert, C-q This command acts as a prefix to cancel the normal interpretation of the next keystroke. If C-q is followed by one to three octal digits, it is interpreted as the code of the character to insert. Otherwise a single key is read and the character typed is inserted into the buffer instead of interpreted as a command. This is used for inserting literal control characters into a buffer. .It self-insert-command This is the default binding for keys representing printable characters. The character is inserted into the buffer at the cursor position, and the cursor moved forward. .El .Sh Killing, Deleting, and Moving Text When text is deleted, it is erased completely. Killing text, on the other hand, moves it into a temporary storage area called the kill buffer. The saved text in the kill buffer is erased when another block of text is killed. Until then, however, you can retrieve text from the kill buffer. This can be used to move or copy blocks of text, as well as to restore accidentally killed text. .Bl -tag -width indent .It backward-kill-word, M-DEL Kill the text backwards from the cursor position to the beginning of the current word. Typing M-DEL several times in succession prepends each killed word to the kill buffer. .It copy-region-as-kill, M-w Copies the text in the region into the kill buffer, without removing it from the current buffer. .It delete-backward-char, DEL Deletes the character to the left of the cursor. .It delete-blank-lines, C-x C-o Deletes all blank lines after the current line, and if the current line is blank, deletes it and all blank lines preceeding it as well. .It delete-char, C-d Deletes the character underneath the cursor. .It delete-horizontal-space, M-backslash Deletes all spaces and tabs on either side of the cursor. .It just-one-space, M-SPC This is like delete-horizontal-space, except it leaves a single space at the cursor position. .It kill-line, C-k If no prefix argument is specified, this function kills text up to the next newline; or if the cursor is at the end of a line, the newline is killed. A prefix argument specifies how many lines to kill. Typing C-k several times in succession appends each line to the kill buffer. .It kill-paragraph This command kills the entire paragraph containing the cursor. If the cursor is positioned between paragraphs, the next paragraph is killed. .It kill-region, C-w The region (all text between point and mark) is killed. .It kill-word, M-d Text is killed forward from the cursor position to the next end of word. If the cursor is at the end of the word, then the next word is killed. Typing M-d several times appends the killed text to the kill buffer. .It yank, C-y Text is copied from the kill buffer into the current buffer at the cursor position. The cursor is moved to the end of the inserted text. .El .Sh Searching and Replacing The ordinary search command in MG differs from that in many other editors in that it is incremental: it begins searching as soon as you begin typing the search string, instead of waiting for you to type the entire string. All of the search commands described in this section are case-insensitive. .Bl -tag -width indent .It isearch-backward, C-r & isearch-forward, C-s These commands perform an incremental search backward and forward, respectively, for a typed pattern. MG will move the cursor to the place in the buffer that matches as much of the pattern as you have typed so far, as each character is entered. .Pp Within the incremental search, the following characters are interpreted specially: .Pp \ DEL Erase the last character in the search string. .Pp \ ESC Stop searching; exit from incremental search mode, leaving the cursor where the search brought it. .Pp \ C-g If a match has been found, exits from incremental search but leaves the cursor in its original position. If the search has failed, this will just erase the characters which have not been found from the end of the search pattern. In this case, you must type C-g again to abort the search. .Pp \ C-s Search forward for the next occurrence of the same pattern. .Pp \ C-r Search backward for the previous occurrence of the same pattern. .Pp \ C-q Quotes the next character typed, forcing it to be interpreted as a literal character in the search pattern. .Pp In addition, normal commands such as C-a that do not have special meanings within incremental search cause the search to be terminated, and then are executed in the ordinary way. .It search-again & search-backward, M-r & search-forward, M-s These commands perform ordinary, non-incremental searches. Search-again uses the same pattern and direction as the previous search. .El .Sh Replacing .Bl -tag -width indent .It query-replace, M-% The primary replace command in MG is an interactive query replace. MG searches forward for occurrences of pattern, and asks you what to do about each one. The choices are: .Pp SPC Replace this match with replacement, and go on to the next. .Pp DEL Skip to the next match without replacing this one. .Pp \ . Replace this match, and then quit. .Pp ! Replace all remaining occurrences without asking again. .Pp ESC Quit. .Pp By default, query-replace adjusts the case of lower-case letters in the replacement string to match that of the particular occurrence of the pattern; for example, replacing Foo with bar results in Bar. Upper case letters in the replacement string are always left uppercase. In addition, supplying a prefix argument will also tell query-replace to leave the case of the replacement string as-is. .Pp Note that query-replace always performs a case-insensitive search. .Sh Regular Expressions Regular expressions provide a means for specifying complex search patterns, instead of just a literal string. The commands in this section are available only if MG is compiled with the REGEX option defined. .Pp Regular expression syntax uses the following rules. Most characters in a regular expression are considered to be ordinary characters, and will match themselves and nothing else. The exceptions are the special characters listed below. .Pp \ . Matches any single character except a newline. .Pp * A suffix operator that matches zero or more repetitions of the (smallest) preceding regular expression. .Pp + A suffix operator that matches one or more repetitions of the (smallest) preceding regular expression. .Pp ? A suffix operator that matches either zero or one occurence of the (smallest) preceding regular expression. .Pp [...] Matches any one character listed in the character set between the square brackets. See examples below. .Pp ^ Matches at the beginning of a line. .Pp dollar Matches at the end of a line. .Pp \\ Except for the situations listed below, acts as a prefix operator which causes the character following to be treated as an ordinary character. .Pp \\bar An infix binary or operator. It applies to the two largest surrounding expressions. .Pp \\(...\\) A grouping construct, usually used to specify a larger expression for postfix operators such as * or to limit the scope of operands to \|. .Pp \\# Matches the same text matched by the #_th \\(...\\) construct. These are numbered from 1 to 9 in the order that the open-parentheses appear. .Bl -tag -width indent .It count-matches & count-non-matches These commands count the number of lines which do or do not (respectively) match the specified pattern. .It delete-matching-lines & delete-non-matching-lines These commands delete all lines which do or do not (respectively) match the specified pattern. .It query-replace-regexp This is the regular expression version of query-replace. The replacement string may be a constant, or it can refer to all or part of the string matched by the pattern. \& in the replacement string expands into the entire text being replaced, while n (where n is a number) replaces the n_th parenthesized expression in pattern. .It re-search-again & re-search-backward & re-search-forward These are the regular expression equivalents of the ordinary non-incremental search commands. .It set-case-fold-search This command toggles an internal variable that controls whether the regular expression search and replace commands pay attention to case. By default, regular expression searches are case-insensitive. Ordinary searches are always case-insensitive and are not affected by the setting of this variable. .Pp See the latex version for the documentation for better description. .El .Sh Windows MG initially has only one text window displayed. However, you can have as many windows as will fit on the screen. Each window has its own mode line and must display at least two lines of text. (Note that MG's windows are distinct from the windows handled by screen managers such as the X Window System.) .Pp Multiple windows may be used to display different buffers. You can also have the same buffer displayed in more than one window, which is useful if you want to see one part of a file at the same time as you are editing another part. .Pp Although many windows can be displayed at once, only one window is active at any given time. This is the window where the cursor appears. .Pp Some commands refer to the other window. This is the window directly below the current window, or the top window if you are in the bottom window. .Bl -tag -width indent .It delete-other-windows, C-x 1 Makes the current window the only window. .It delete-window, C-x 0 Deletes the current window, making the other window the current window. This command doesn't do anything useful if there is only one window being displayed. .It enlarge-window C-^ Makes the current window larger. Without a prefix argument, the window grows one line; otherwise, the prefix argument specifies how many lines to grow. .It other-window, C-x o Makes the other window the current window. .It previous-window This is like other-window, except that it cycles through the windows in reverse order. This command is available only if MG was compiled with the GOSMACS option defined. .It shrink-window Makes the current window smaller. Without a prefix argument, the window loses one line; otherwise, the prefix argument specifies how many lines go away. .It split-window-vertically, C-x 2 Split the current window into two windows, both using the same buffer. .El .Sh Files and Buffers Most buffers are used to contain a file being edited. It is also possible to have buffers that are not associated with any file; MG uses these for purposes such as displaying help text, for example. However, since most commands for dealing with files also deal with buffers, we have grouped all of these commands together into one chapter. .Bl -tag -width indent .It insert-buffer Inserts the contents of the named buffer into the current buffer at the cursor location. The cursor moves to the end of the inserted text. .It kill-buffer C-x k The named buffer and its contents are deleted. If the buffer has been marked as modified, MG will ask you if you really want to delete it. Note that, contrary to its name, this command does not save the buffer contents in the kill buffer. If a buffer is being displayed in a window when it is deleted, MG will find some other buffer to display in the same window. .It list-buffers, C-x C-b This command writes information about the buffers currently in use to a buffer named Buffer List. This buffer is then displayed in the other window; if there is only one window, this command will split the screen into two windows. .It not-modified, M-~ This command makes MG think that the current buffer has not been modified, even if it really has been changed. This affects the behavior of the kill-buffer and the buffer-saving commands described below. .Pp MG indicates modified buffers with two stars at the left end of the mode line. .It switch-to-buffer, C-x b The current window is mapped onto the named buffer. If there isn't already a buffer with that name around, MG will create one. .It switch-to-buffer-other-window, C-x 4 b This command works like switch-to-buffer, except that the other window is used. If there is only one window, this command splits the screen into two windows and maps the named buffer onto one of them. .El .Sh Reading and Writing Files .Bl -tag -width indent .It find-file C-x f & find-file-other-window C-x 4 C-f These commands are analagous to switch-to-buffer and switch-to-buffer-other-window, respectively. The difference is that these commands look for a buffer associated with the named file. If no matching buffer is found, MG will create a new buffer with a name derived from the filename, and attempt to read the file into the buffer. If the named file cannot be opened, the buffer remains empty. .It insert-file C-x i This command reads in the contents of the named file into the current buffer at the cursor position. The cursor remains in the same place. .It save-buffer, C-x C-s If the current buffer has been modified, it is saved. Buffers that are not associated with files cannot be written out with this command. .It save-buffers-kill-emacs, C-x C-c This command is used to leave MG and return control to the shell or other program that was used to start MG. If there are modified buffers, MG will ask you if you want to save them before exiting. .It save-some-buffers, C-x s MG will ask you if you want to save modified buffers that are associated with files. .It write-file C-x C-w The current buffer is written out using the file name supplied. This is useful for saving buffers that are not associated with files, or for writing out a file with a different name than what was used to read it in. .El .Sh Backup Files MG provides a way to save a copy of the original version of files which have been modified and then written out again. The backup copy reflects the state of the file as it existed the first time it was read into MG. The name used for the backup file varies, depending on the operating system. .Pp This feature is disabled if MG is compiled with NO_BACKUP defined. .Bl -tag -width indent .It make-backup-files This command is a toggle which controls the state of an internal variable that determines whether MG creates backup files. .Sh Changing the Directory The commands in this section are disabled by defining NO_DIR. .Bl -tag -width indent .It cd This command changes MG's notion of the current directory or pathname. This is used to supply defaults for functions that read or write files. .It pwd Display what MG thinks is the current directory. .El .Sh Modes Modes are used to locally alter the bindings of keys on a buffer-by-buffer basis. MG is normally in fundamental mode, and these are the bindings that are listed with the command descriptions in this manual. Modes define additional keymaps that are searched for bindings before the fundamental mode bindings are examined; see the section on key binding below for more details on how this works. .Bl -tag -width indent .It set-default-mode Normally, when MG visits a file, it puts the associated buffer into fundamental mode. Using the set-default-mode command, you can specify that MG should default to use some other mode on all subsequent buffers that are created. This command is a toggle. With no prefix argument, if the named mode is not already on the list of default modes, then it will be added to the list; otherwise, it is removed from the list. .It no-tab-mode This command is a toggle to control whether notab mode is in effect. In notab mode, tabs are expanded into spaces instead of inserted literally into the buffer. Literal tab characters are displayed as ^I (much like other control characters). These commands are available if MG is compiled with the symbol NOTAB defined. (This mode is mainly for use on systems such as PRIMOS that do not treat tab as a series of spaces.) .It space-to-tabstop Insert enough spaces to move the cursor to the next tab stop. In notab mode, this function is bound to C-i. .It overwrite-mode This command is a toggle which controls whether overwrite mode is in effect. Normally, when characters are inserted into the buffer, they are spliced into the existing text. In overwrite mode, inserting a character causes the character already at the cursor position to be replaced. This is useful for editing pictures, tables, and the like. .It auto-fill-mode This command is a toggle which controls whether fill mode is in effect. Fill mode causes newlines to be added automatically at word breaks when text is added at the end of a line, extending past the right margin. Auto fill is useful for editing text and documentation files. .It insert-with-wrap This command works like self-insert, except that it checks to see if the cursor has passed the right margin. If so, it fills the line by inserting a line break between words. This command is bound to SPC in fill mode. .It fill-paragraph, M-q Fill the paragraph containing the cursor. .It set-fill-column, C-x f Without a prefix argument, this command sets the right margin at the current cursor column. If a prefix argument is supplied, it is used instead as the line width. .It auto-indent-mode This command is a toggle which controls whether auto-indent mode is in effect. Indent mode binds RET to newline-and-indent, so that each new line is indented to the same level as the preceeding line. This mode is useful for editing code. .It blink-matching-paren This command is a toggle which controls whether blink mode is in effect. Blink mode makes it easier to match parentheses, brackets, and other paired delimiters. When the closing delimiter is typed, the cursor moves momentarily to the matching opening delimiter (if it is on the screen), or displays the line containing the matching delimiter on the echo line. This is useful for editing Lisp or C code, or for preparing input files for text processors such as LaTeX that use paired delimiters. .It blink-matching-paren-hack This function behaves like self-insert, except that it finds the matching delimiter as described above. In blink mode, this function is bound to ), which flashes the matching (. This function also knows about the pairs {}, [], and <>. All other characters match with themselves. .El .Sh Dired Mode Dired is an abbreviation for directory editor, and it provides a way to browse through the contents of a directory from with MG. Dired puts a directory listing into a buffer; you can use normal editing commands to move around the buffer, and a special group of commands to manipulate the files. For example, there are commands to delete and rename files, and to read a file into an MG buffer. .Pp Since dired mode rebinds many keys, a table may be helpful: .Pp C-d dired-flag-file-deleted .Pp SPC next-line .Pp c dired-copy-file .Pp d dired-flag-file-deleted .Pp e dired-find-file .Pp f dired-find-file .Pp n next-line .Pp o dired-find-file-other-window .Pp p previous-line .Pp r dired-renamefile .Pp u dired-unflag .Pp x dired-do-deletions .Pp DEL dired-backup-unflag .Pp The commands in this section are disabled by defining NO_DIRED. .Bl -tag -width indent .It dired C-x d Creates a dired buffer for the given directory name, and displays it in the current window. The files in the directory are listed, usually along with information about the file such as its size and timestamp. The exact format of the information is system-specific. .It dired-backup-unflag This function removes the deletion flag from the file listed on the previous line of the dired buffer. .It dired-copy-file Copy the file listed on the current line of the dired buffer. .It dired-do-deletions Deletes the files that have been flagged for deletion. .It dired-find-file & dired-find-file-other-window These function works like find-file and find-file-other-window, except that the filename is taken from the current line in the dired buffer. .It dired-flag-file-deleted Flag the file listed on the current line for deletion. This is indicated in the buffer by putting a D at the left margin. No files are not actually deleted until the function dired-do-deletions is executed. .It dired-other-window This function works just like dired, except that it puts the dired buffer in the other window. .It dired-rename-file Renames the file listed on the current line of the dired buffer. Note that the dired buffer is not updated to reflect the change. .It dired-unflag Remove the deletion flag for the file on the current line. .El .Sh Help Most of the commands in this section write useful information to the *help* buffer, which is then displayed in the other window. .Pp These commands can be disabled at compile-time by defining NO_HELP. .Bl -tag -width indent .It apropos, C-h a This command lists all functions whose names contain a string matching topic in the help buffer. .It describe-bindings, C-h b Information about the key bindings in effect in the current buffer is listed in the help buffer. .It describe-key-briefly, C-h c Information about the binding of ke is printed in the minibuffer. .It help-help, C-h C-h This command lists all of the help options available and prompts for which one to run. Currently, these include only a to run apropos, b to run describe-bindings, and c to run describe-key-briefly. .El .Sh Keyboard Macros A keyboard macro is a saved set of commands from the keyboard that can be reexecuted later on. There can only be one keyboard macro defined at any one time. .Pp The commands in this section are available unless they have been disabled by defining NO_MACRO. .Bl -tag -width indent .It call-last-kbd-macro, C-x e Execute the saved keyboard macro. A prefix argument can be used to specify a repetition count. .It end-kbd-macro, C-x ) & start-kbd-macro, C-x ( These functions are used to define a keyboard macro. All keys entered after start-kbd-macro is executed, up to a end-kbd-macro, are remembered as they are executed. You can then reexecute the same sequence of operations using call-last-kbd-macro. .El .Sh Changing Case MG provides a number of functions for changing the case of text. .Bl -tag -width indent .It capitalize-word, M-c .It downcase-region, C-x C-l .It downcase-word, M-l .It upcase-region, C-x C-u .It upcase-word, M-u .El .Sh Odds and Ends This section describes miscellaneous commands that don't fit into any particular category. .Bl -tag -width indent .It emacs-version Prints information about the version of MG you are running in the minibuffer. .It meta-key-mode If the particular version of MG you are running supports a meta key, this function can be used to determine whether MG actually pays attention to it or not. If no prefix argument is supplied, the internal variable that controls the use of the meta key is toggled; a positive value enables the meta key, while a negative value disables it. .It prefix-region & set-prefix-string Prefix-region is used to prefix each line of the region with a string. This is useful for indenting quoted text, making block comments, and the like. The function set-prefix-string can be used to set the string used as the prefix. .It suspend-emacs, C-z This command temporarily suspends MG so that you can run other programs, and later resume editing. The exact behavior depends on which operating system you are running MG under. Typically, MG will either spawn a new shell as a subprocess, or return you to the parent process. .It transpose-chars, C-t This command transposes the previous two characters. .El .Sh Customization MG provides a limited support for customization. However, unlike real Emacs, there is no extension language for interpretively defining new functions. .Sh Key Bindings MG allows keys to be rebound locally or globally. To understand the difference between the two, some discussion on how modes are implemented is necessary. .Pp An internal data structure called a keymap is used to look up the function that is bound to a particular key. The keymap for fundamental mode contains all of the default bindings which are listed with the command descriptions in this manual. Modes define additional keymaps that are searched for a binding before the fundamental mode keymap is examined. Keymaps have the same name as the mode they are associated with. .Pp MG does not provide commands for defining new modes, but you can alter the keymaps for existing modes. .Bl -tag -width indent .It define-key This command can be used to modify the keymap for the named mode. .It global-set-key & global-unset-key These commands modify the keymap for fundamental mode. Bindings established by global-set-key will be inherited by all other modes, as long as they do not establish local rebindings of the same key. .It local-set-key & local-unset-key These commands modify the keymap currently in effect. .El .Sh Startup Files Although MG does not include a general-purpose extension language, it does provide a way to read and evaluate commands using a somewhat different syntax than that used for executing extended commands. This is typically used in a startup file to modify key bindings. .Pp A startup file consists of one or more expressions. Each expression must appear on a separate line in the file; there may not be more than one expression per line, nor may expressions span across line breaks. Whitespace (spaces and tabs) separate the tokens in an expression. For historical reasons, parentheses are also considered to be whitespace in this context. A semicolon acts as a comment character, causing the rest of the line to be discarded. .Pp An expression consists of a function name, an optional prefix argument (given as an integer constant), and arguments to be passed to the function. If an argument includes literal whitespace or nonprintable characters (for example, as in a keystroke argument to one of the key binding functions described in the previous section), it must be supplied as a string constant enclosed in double quotes. .Pp The following commands which deal with evaluation of expressions are disabled by defining the compile-time option NO_STARTUP. See the implementation notes for your particular version of MG for information on how it handles startup files. .Bl -tag -width indent .It eval-current-buffer Evaluate the expressions in the current buffer. .It eval-expression Evaluate the expression supplied. .It load Read in the specified file and evaluate its contents. .El .Sh Fundamental Mode Key Bindings .Pp NUL set-mark-command .Pp C-a beginning-of-line .Pp C-b backward-char .Pp C-d delete-char .Pp C-e end-of-line .Pp C-f forward-char .Pp C-g keyboard-quit .Pp C-h help .Pp TAB self-insert-command .Pp C-j newline-and-indent .Pp C-k kill-line .Pp C-l recenter .Pp RET newline .Pp C-n next-line .Pp C-o open-line .Pp C-p previous-line .Pp C-q quoted-insert .Pp C-r isearch-backward .Pp C-s isearch-forward .Pp C-t transpose-chars .Pp C-u universal-argument .Pp C-v scroll-up .Pp C-w kill-region .Pp C-x c-x prefix .Pp C-y yank .Pp C-z suspend-emacs .Pp ESC meta prefix .Pp SPC .. ~ self-insert-command .Pp DEL delete-backward-char .Pp C-h C-g keyboard-quit .Pp C-h C-h help-help .Pp C-h a apropos .Pp C-h b describe-bindings .Pp C-h c describe-key-briefly .Pp C-x C-b list-buffers .Pp C-x C-c save-buffers-kill-emacs .Pp C-x C-f find-file .Pp C-x C-g keyboard-quit .Pp C-x C-l downcase-region .Pp C-x C-o delete-blank-lines .Pp C-x C-s save-buffer .Pp C-x C-u upcase-region .Pp C-x C-w write-file .Pp C-x C-x exchange-point-and-mark .Pp C-x ( start-kbd-macro .Pp C-x ) end-kbd-macro .Pp C-x 0 delete-window .Pp C-x 1 delete-other-windows .Pp C-x 2 split-window-vertically .Pp C-x 4 c-x 4 prefix .Pp C-x = what-cursor-position .Pp C-x ^ enlarge-window .Pp C-x b switch-to-buffer .Pp C-x d dired .Pp C-x e call-last-kbd-macro .Pp C-x f set-fill-column .Pp C-x i insert-file .Pp C-x k kill-buffer .Pp C-x o other-window .Pp C-x s save-some-buffers .Pp C-x 4 C-f find-file-other-window .Pp C-x 4 C-g keyboard-quit .Pp C-x 4 b switch-to-buffer-other-window .Pp C-x 4 f find-file-other-window .Pp M-C-g keyboard-quit .Pp M-C-v scroll-other-window .Pp M-SPC just-one-space .Pp M-% query-replace .Pp M-- negative-argument .Pp M-0 digit-argument .Pp M-1 digit-argument .Pp M-2 digit-argument .Pp M-3 digit-argument .Pp M-4 digit-argument .Pp M-5 digit-argument .Pp M-6 digit-argument .Pp M-7 digit-argument .Pp M-8 digit-argument .Pp M-9 digit-argument .Pp M-< beginning-of-buffer .Pp M-> end-of-buffer .Pp M-[ backward-paragraph .Pp M-\ delete-horizontal-space .Pp M-] forward-paragraph .Pp M-b backward-word .Pp M-c capitalize-word .Pp M-d kill-word .Pp M-f forward-word .Pp M-l downcase-word .Pp M-q fill-paragraph .Pp M-r search-backward .Pp M-s search-forward .Pp M-u upcase-word .Pp M-v scroll-down .Pp M-w copy-region-as-kill .Pp M-x execute-extended-command .Pp M-~ not-modified .Pp M-DEL backward-kill-word .Pp .Sh Bugs and Limitations Some listed in the LaTeX documentation. A few path-length issues, like not being able to handle files with too great a path length. An irritating behavior that arrow keys leave their control characters (sans the leading escape) when pressed during incremental-search. .Sh History The original authors of mg2a were Bob Larson, Mic Kaczmarczik, Mike Meyer, Sandra Loosemore, Michael Portuesi, Stephen Walton, Marion Hakanson, Dave Brower, Jeff Siegal, and John P. Nelson. It was posted to the comp.sources.misc mailing list of Usenet sometime around 1988. .Pp Modified for NetBSD by John P. Refling as follows: .Pp December 1999 (version 1.00) .Pp Port to NetBSD (not much to do there) and a change to the mg.rc startup file name and search paths (searches the directory where the executable is first). Also hastily turned the LaTeX documentation written by Sandra J Loosemore in 1987 into this manpage. .Pp January 2000 (version 1.10): .Pp Journaling: if a subdirectory named .journal exists in the directory of the edited file fn, the edited file is copied into the .journal subdirectory as fn-@# before the new version is written out. The # is the system time in seconds since January 1, 1970. This feature creates a transparent backup chain of all files edited within a selected directory. If the edited file did not exist at the start of the editing session, a zero length fn-@# file is created. .Pp If the environment variable MG_DOT_ORIG is set, then the edited file fn is copied to a fn.orig file, only if a fn.orig file does not already exist. Helpful for creating diffs. If the edit file itself does not exist prior to the editing session, a fn.orig file is touched. .Pp All these actions are indicated in the information bar when the file is being saved: `Wrote (o+j) filename....' o indicates that a fn.orig was created, and j indicates that a time stamped copy was made in the .journal directory.